Owners manual

KVM Access Management Software User Manual78
Sessions
Clicking the Sessions Panel Menu item that appears when KVM ACCESS Network is selected on the
Page Menu, or in the Sidebar, lists all the sessions currently taking place on all the KVM ACCESS on
the installation, and provides information concerning the "who, where and when" of each.
Note: 1. To only see the sessions for a particular KVM ACCESS server, use the navigation
buttons at the top-right of the main panel to select it.
2. To end a session, you must do it from the KVM ACCESS Servers Sessions Panel Menu.
Security
This page provides a level of security by controlling access to KVM ACCESS.
IP Filtering. IP filtering controls access to KVM ACCESS based on the IP addresses of the computers
attempting to connect to it.
• To enable IP filtering, check the Enable IP Filter checkbox.
– If the Include button is selected, all the addresses specified in the Address List are allowed
access; all other addresses are denied access.
– If the Exclude button is selected, all the addresses specified in the Address List are denied
access; all other addresses are allowed access.
• IP filters can consist of a single address, or a range of addresses. You can add as many IP
addresses as you require. Enter the addresses directly into the IP address text input box.
– For multiple single address entries, use a comma between the IP addresses. There is no space
before or after the commas.
– For a range of filters, enter the starting IP address, followed by a dash, then the ending IP
address.
• To modify or delete a filter, make your changes directly in the IP address text input box.