User`s guide

®
®®
®
USER’S GUIDE masterswitch plus
15
MasterSwitch Plus configuration
Configuration of MasterSwitch Plus is dependent upon your application.
You can use only “on-demand” operations (On, Off, Shutdown, and
Reboot), or you can couple on-demand operations with “unattended”
shutdown features. If you plan to use only on-demand operations, see
Configuring an outlet for on-demand operation. If you plan to use the
“unattended” shutdown features of MasterSwitch Plus in addition to the on-
demand operations, see Configuring an outlet for unattended shutdown.
MasterSwitch Plus behaviors
The diagrams, starting with Unit/Outlet start-up sequence, define the
behaviors for every event recognized by the MasterSwitch Plus unit. You
customize the unit‘s behavior by choosing specific values for the unit and
outlet properties. All outlet and unit properties on the diagrams are a
highlighted hotlink that lead you to the property’s definition. All outlet and
unit properties are defined in MasterSwitch Plus Menus.
Configuring an outlet for on-demand operation
Configuring an outlet for on-demand operation requires selecting values for
the following properties:
Property Used in Sequence Diagram
Unit Properties
Power On Time Delay Unit/Outlet start-up sequence
Outlet Properties
Outlet Control Mode No diagram available
Reboot Duration Reboot sequence and Graceful reboot sequence