Datasheet

Advanced View: Configuring Pods and Alerts
104 Using Your Appliance
Wireless Sensor Discovery
Use the Wireless Sensor Discovery task to specify the discovery settings that will be used when detecting
the presence of THS-100 Wireless Temperature/Humidity Sensors.
To change the Wireless Sensor Discovery settings, type the new values in the appropriate fields. When
you are finished, click OK to save any changes to the appliance. Click Cancel to close this window
without saving any changes.
Note
Wireless sensors can be used only in conjunction with a Wireless Receiver 120.
This task will not be available for use unless a Wireless Receiver 120 has been
connected to your appliance and the serial port has the receiver assigned to it
using the Serial Devices task.
Field Description
Discovery mode This setting determines the circumstances under which new
wireless sensors will be discovered and added to the list of
sensors available from the Wireless Receiver 120. There are two
discovery mode settings available:
• Any: Any detected wireless sensor will automatically be added
to the list of wireless sensors.
• None: No additional wireless sensors will be discovered.
Timeout (minutes) The number of seconds that can pass after data has been
received from a wireless sensor before, if no additional data is
received, the sensor is considered to be offline. The default
setting is 10 minutes.
Serial numbers to exclude If desired, use the Add button to add to this list the serial
numbers of wireless sensors that you want to ignore.