Datasheet

Advanced View: Configuring Appliances
Using Your Appliance 129
Region
Use the Region task to specify the region in which the appliance is being used and to configure the
appliance clock to report time using a 12- or 24-hour clock.
To start this task, double-click on the Region icon to open the Region Settings window.
The Region task.
This window contains the following fields:
To change the Region settings, type the new values in the appropriate fields. When you are finished, click
OK to save any changes to the appliance. Click Cancel to close this window without saving any changes.
Note
Region settings affect only the date and time stamp displayed in the image
captures and the format of sensor readings and dates or times specified in alert
notifications generated by the appliance itself. The regional format of dates, times,
and sensor readings that are displayed in the Advanced View (such as in the
Sensor Readings pane) are determined by the region settings reported by the
operating system of the system on which the Advanced View is running.
Field Description
Supported Locales A list of all locales supported by the appliance.
Time Zones A list of time zones supported by the appliance.
Use 12 Hour Clock Select to configure the appliance to report time using a 12-hour
clock (for example, 2:30PM).
Use 24 Hour Clock Select to configure the appliance to report time using a 24-hour
clock (for example, 14:30).
Note
Changes to the Locale or Time Zone of an appliance will not take affect until the
appliance is restarted. Use the Reboot Appliance tool (located in the Tools pull-
down menu) to restart the appliance when you have finished configuring the
Region settings if needed.