Datasheet

Advanced View: Configuring Pods and Alerts
78 Using Your Appliance
In addition, Device Crawlers will also gather and present the following information about the network
interfaces of all configured SNMP targets in individual sensor sets:
• Admin Status: State sensor that reports the admin status of the interface.
• IF Description: Displays the interface’s description value (does not support configuration of
thresholds).
• IF MAC Address: Displays the interface’s MAC address (does not support configuration of
thresholds).
• IF Type: State sensor that reports the interface type value.
• Incoming Discards: Analog sensor that reports the number of incoming packets discarded by the
interface.
• Incoming Errors: Analog sensor that reports the number of incoming packets containing errors
received by the interface.
• Incoming Non-Unicast Packets: Analog sensor that reports the number of incoming non-unicast
packets received by the interface.
• Last Change: Analog sensor that reports the last change value for the interface.
• OP Status: Analog sensor that reports the OP status of the interface.
• Outgoing Errors: Analog sensor that reports the number of outgoing packets containing errors sent
by the interface.
• Outgoing Non-Unicast Packets: Analog sensor that reports the number of non-unicast packets sent
by the interface.
• Outgoing Octets: Analog sensor that reports the number of outgoing octets sent by the interface.
• Outgoing Unicast Packets: Analog sensor that reports the number of outgoing unicast packets sent
by the interface.
About Advanced Device Crawlers
Advanced Device Crawlers builds on the functionality provided by the basic Device Crawlers
application, greatly extending your ability to monitor the operational status of your SNMP targets.
Advanced Device Crawlers, a license-key based Device Crawlers upgrade, extends the capabilities of
Device Crawlers to provide far more detailed device-specific information and to enable OID-specific
monitoring and alerting.
Also, with Advanced Device Crawlers you can use Device Description Files (provided by NetBotz) that
make it quick and easy to monitor the environmental and physical data reported by some supported
SNMP devices.
For more information about Advanced Device Crawlers, see “Add-Ons: Advanced Device Crawlers” on
page 177.