Specifications

NetShelter SX Enclosure — Unpacking, Installation, and Customization Manual8
Leveling Rack-Based Equipment
Note: The leveling feet provide a stable base if the floor is uneven, but cannot compensate
for a badly sloped surface.
Note: To allow the equipment to rest directly on the floor the casters and leveling feet can be
removed.
The front and rear doors may need to be removed. See the section elsewhere in this manual
for removal and installation instructions.
1. Using a screw driver or 13 mm wrench lower
each leveling foot until in makes contact with
the floor.
2. Adjust each foot until the equipment is level
and plumb.
na1572a