User Manual

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 15
Start up Settings
When the UPS is powered on for the first time the display interface displays the Setup Wizard to configure the start
up settings. Configuration can also be performed using PowerChute™ software.
Note: If the start up settings asked by the Setup Wizard are not selected completely, turning on UPS output is
prohibited. If the UPS output is turned on, the Setup Wizard will be displayed again to complete the configuration
of the start up settings.
Connect and Install Management Software
Smart-UPS is provided with PowerChute management software for unattended operating system shutdown, UPS
monitoring, UPS control and energy reporting. The following diagram is a representation of a typical server
installation.
Function Factory Default Options Description
Language English English
French*
German*
Spanish*
Italian*
Portuguese*
Japanese*
The language for the display interface.
*Language options will vary by model.
Local Power
Quality
Good Good
Fair
Poor
Select the quality of input AC power.
• If Good is selected, the unit will go on battery power more often to
provide the cleanest power supply to the connected equipment.
• If Poor is selected, the UPS will tolerate more fluctuations in power
and will go on battery power less often.
If unsure of the local power quality, select Good.
Menu Type Standard Standard
Advanced
The standard menu displays the most commonly required menus for
most users. The advanced menus include all parameters.
Today’s Date Manufacture
date
Use the arrows to enter today’s day, and the to
complete the settings.
1 . Connect the USB cable from the rear of
the UPS to the protected device
such as a server.
2 . For a server or other device with an
operating system, load the PowerChute
CD and follow the on-screen set-up
instructions. PowerChute provides for
graceful shutdown in the event of an
extended power outage and is a
powerful management interface on the
local network.
3 . A built-in serial port
is also
available for additional communication
options with an optional serial cable.
For more detailed information on
supported protocols and options refer to
application note #181 at www.apc.com.
4 . Even more communication options are
available via the built-in Smartslot.
Refer to www.apc.com for more
information.