Installation manual

4Smart-UPS
®
VT SBP with Power Distribution 10-30kVA, 208V, Installation Manual - 990-4198A
Product Overview
Features
The wall-mount version of the Smart-UPS
®
VT Service Bypass Panel (SBP) with Power Distribution
combines bypass functionality with power distribution capability in a common enclosure. The unit
measures 37.36in [949mm] high x 29.53in [750mm] wide x 7.48in [190mm] deep, and weighs
approximately 120lbs [54.5kg]. The SBP can be installed quickly and easily to almost any type of
sturdy wall structure (refer to “Mounting the SBP” on page 10).
The SBP enclosure supports both top and bottom cable entry. There are twenty-two (22) 1-inch
[25.4mm] knockouts in the top and bottom plates (44 knockouts total). Space has additionally been
provided at the far ends of these plates to accommodate larger cutouts. The unit also contains three
(3) 90A fuses that provide over-current and short-circuit protection.
Product SKU Input Output
SBPSU10K30FC1M1-WP 81.3A, 208/120V, 3-Phase, 50/60Hz 83.3A, 208/120V, 3-Phase, 50/60Hz
Top Plate Knockouts (22)
Space for Cutouts (both ends)
37.36”
[949]
29.53”
[750]
7.48”
[190]