Datasheet

MATERIAL SAFETY DATA SHEET
Page 1 of 7
BATTERY PACK CONTAINING LEAD ACID BATTERY
Issue Date
December 2012
Version 1.4
IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Company Name: Schneider Electric IT USA (formerly APC by Schneider Electric,
APC Sales and Service Corp.)
Address: 132 Fairgrounds Road
West Kingston, RI 02892
Tel: 800-788-2208 or 401-789-5735
Contact: http://nam-en.apc.com/app/ask
Web: www.APC.com
SECTION 1: HAZARDS IDENTIFICATION
Product Name: Battery pack containing Lead Acid Battery
Other Names: Lead Acid Battery Wet, non-spillable,
Manufacturer’s Product Code: (APC)RBCXXX(L) or SYBTXXX(-PLP) (where XXX is 001
through 100 and APC and L are optional)
YYYY(XXX)BP (where YYYY is SU, SUA, UX, UXA or SURT and
XXX is 24, 48 or 192)
Chemical Family: Electrical Storage Battery
VOL/WGT: Varies with model
UN Number: 2800
Dangerous Goods Class: 8
Packaging Group III
Hazchem Code: 2W
Use: Electric Storage Battery
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS Number: Proportion:
Lead 7439-92-1 30-60%
Sulfuric Acid 7664-93-9 20-40%
Lead Dioxide 1309-60-0 10-30%
Percentages of components are dependent on both the model of the RBC and the state of charge/discharge
of the battery.
NOTE: The Sealed Lead Acid batteries used in APC by Schneider Electric Replacement Battery Cartridges
(RBCs) are contained within cartridges and are sealed, non-spillable design. Under normal use and
handling, there is no contact with the internal components of the battery or the chemical hazards. Under
normal use and handling, these products do not emit regulated or hazardous substances. Misuse of the
product, such as overcharging, may result in a discharge of battery electrolyte.

Summary of content (7 pages)