Installation guide

15Installation Guide Silcon DP300E Series 480V 120-160kVA
7OH0006 US rev. 03
4.1.3 Separation of AC from DC1 and DC2
Two pieces of polycarbonate are supplied along with
the UPS and are used for separating the AC from
DC1 and DC2. The length of the polycarbonate is
delivered as standard top entry.
If bottom entry is used, the polycarbonate has to be
cut for proper installation.
4.1.4 Top or bottom entry
If top cable entry is used, the copper angle bar has to be moved to bottom.
Connection
Unscrew bolt, take out the split, move the
angle bar down, insert split, and tighten the
bolt.
Angle bar