Installation guide

26 Installation Guide Silcon DP300E 480V 120-160kVA
7OH0006 US rev. 03
4.3 Communication interface – ComInterface
4.3.1 Introduction
The ComInterface having 2 ports - is used when an interaction between UPS and e.g.
a computer system has to be established. The main purpose is to ensure monitoring
and if needed, a controlled shut down of the computer in case of failures in the utility
supply.
4.3.2 Connections
Connection
X008, 25 pin SUB D male.
Serial port RS232.
For service use.
Smart slot,
see chapter 4.4
X005, 25 pin SUB D female. ComPort.