Installation guide

34 Installation Guide Silcon DP300E 480V 120-160kVA
7OH0006 US rev. 03
Connection
4.6.1.1 Safety - Warnings
WARNINGS
The total system contains HAZARDOUS AC/DC VOLTAGES and is supplied
from more power sources. Some terminals and components are live even when the
system is switched off!
ONLY qualified electricians are allowed to perform the installation according to
national and local codes!
NO Silcon DP300E types are allowed to have built-in batteries when connected to
external batteries!
Do NOT install batteries that do not follow the specification indicated by APC,
otherwise the installer takes over the full responsibility!
Do NEVER lift or transport the battery cubicle with batteries installed.
4.6.1.2 Placing
See Installation Guide from battery supplier.
4.6.1.3 Preparing the batteries and the Silcon DP300E
Unpack the batteries, check that the type, no., and size is corresponding to the
ordered.
4.6.1.4 Dimensions and weights
See Installation Guide from battery supplier.
4.6.1.5 Mounting the batteries
See Installation Guide from battery supplier.
4.6.1 Cubicle for batteries