Installation guide

6 Installation Guide Silcon DP300E 480V 120-160kVA
7OH0006 US rev. 03
Battery rack or cubicle.
The rack or cubicle is used for external
batteries, for storing the battery bank.
Isolation transformer.
The isolation transformer is used, when galvanic
isolation is required from the source to the
conditioned power. This transformer should also
be used if the source is something other than a
grounded Wye supply.
Seismic Anchoring.
Seismic anchoring is used for stabilization of the
UPS, when needed for seismic areas.
NEMA 12 cover.
This is used for locations where there is a potential
of liquid discharge or leakage above the UPS
system.
Remote display.
The remote display is used for remote monitoring
of the UPS.
Unpacking
Battery cubicle Battery rack