Installation guide

Smart-UPS On-Line SRT5K/6K Tower/Rack-Mount 3U/4U22

Display interface operation

Use the UP/DOWN buttons to scroll through the options. Press the OK button to accept the selected option. Press the

ESC button to return to the previous menu.

Menu overview

The display interface has Standard and Advanced menu screens. The preference for Standard or Advanced menu

selections is made during initial installation and can be changed at any time through the Configuration menu.

The Standard menus include the most commonly used options.

The Advanced menus provide additional options.

Note: Actual menu screens may differ by model and firmware version.

Refer to the UPS Operation Manual for menu configuration details.

LCD display interface angle adjustment

The angle of the LCD display interface can be adjusted for ease in viewing the displayed messages.

1. Remove the front bezel.

2. Locate the button on the bottom of the display interface panel.

3. Press the button and slide the bottom of the LCD display interface screen out. An audible click will be heard

4. when the screen reaches the maximum angle.