Installation guide

Smart-UPS On-Line SRT5K/6K Tower/Rack-Mount 3U/4U 7

Remove Battery Modules

Use the battery module handle to lift and slide the battery modules out of the UPS.

Rack-Mount Installation

Refer to the Rail Kit Installation Guide for instructions on rail installation.

CAUTION

DAMAGE TO EQUIPMENT OR PERSONNEL

• The equipment is heavy. Each battery module weighs 17 kg (37 lb).

• Always practice safe lifting techniques adequate for the weight of the equipment.

• Remove the battery modules before installing the UPS.

• Use the battery module handle to slide the battery modules in or out of the UPS.

• Do not use the battery module handle to lift or carry the battery module.

Failure to follow these instructions can result in equipment damage and minor or moderate injury.





CAUTION

DAMAGE TO EQUIPMENT OR PERSONNEL

• The equipment is heavy. Always practice safe lifting techniques adequate for the weight of the equipment.

• Always use the recommended number of screws to secure brackets to the UPS.

• Always use the recommended number of screws and cage nuts to secure the UPS to the rack.

• Always install the UPS at the bottom of the rack.

• Always install the XLBP below the UPS in the rack.

Failure to follow these instructions can result in equipment damage and minor or moderate injury