User manual

User Manual Smart-UPS RC XLI/XLICH/XLI-CC 1000/2000/3000 VA 220/230/240 Vac Tower/Rack-Mount 4U 11
Connect internal batteries
This unit is equipped with internal battery modules. Each module must be connected to battery connectors
on chassis.
1. Install batteries.
2. Connect batteries.
3. Replace battery compartment door and secure door with
screws previously removed.
Install bezel
1. Fit three tabs on inside edge of bezel into slots in chassis.
2. Tip bezel toward chassis. Fit two tabs on inside edge of bezel into
slots in chassis and snap bezel into position.
su0240a
su0239a
su0241a