User manual

User Manual Smart-UPS RC XLI/XLICH/XLI-CC 1000/2000/3000 VA 220/230/240 Vac Tower/Rack-Mount 4U 20
Maintenance and transport
Battery replacement
This UPS has a replacable, hot-swappable battery module. Replacement is a safe procedure, isolated from
electrical hazards. Leave the UPS and connected equipment on during the replacement procedure.
Once the batteries have been disconnected the connected equipment is not protected
from power outages.
Refer to the appropriate replacement battery user manual for battery module installation instructions. See
your dealer or contact APC at www.apc.com for information on replacement battery modules.
Be sure to deliver the spent battery(s) to a recycling facility or ship it to APC in the
replacement battery packing material.
Prepare the UPS for transport
1. Shut down and disconnect UPS from utility power.
2. Disconnect UPS from any external batteries.
3. Shut down and disconnect all equipment connected to UPS.
4. Unplug internal battery connectors.
5. Follow shipping instructions outlined in the Service section of this manual.
Regulatory Agency Approvals and Radio Frequency Warnings
Class A
This device complies with EN62040-2 Class A requirements. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.