User manual

User Manual Smart-UPS RC XLI/XLICH/XLI-CC 1000/2000/3000 VA 220/230/240 Vac Tower/Rack-Mount 4U 8
Install and connect batteries
This unit is equipped with battery modules. Each module
must be connected to battery connectors on the chassis.
1. Install batteries.
2. Connect batteries.
3. Replace battery compartment door and secure door with
screws previously removed.
Install bezel
1. Fit three tabs on bottom inside edge of the bezel into slots in
chassis.
2. Tip bezel forward. Fit two tabs on top inside edge of bezel into
slots in chassis and snap bezel into position.
su0243a
su0272b
su0244a