User manual

ManualsBrandsAPC Manualsbatteries & accessoriesSmart-UPS RT 192V RM Battery Pack

990-1387A 09/2003

User Manual

Language Addendum English

The User Manual is accessible from the supplied CD and the

APC web site, www.apc.com

Supplément multilingue

du guide d’utilisation Français

Le Guide d’utilisation est disponible dans d’autres langues

sur le CD fourni, de même qu’au site Web de APC,

www.apc.com

Installationshandbuch-

Sprachenanhang Deutsch

Das Installationshandbuch ist auf der beiliegenden CD und

der APC Web-Seite, www.apc.com

, in weiteren Sprachen

verfügbar.

Anexo al Manual del Usuario

en español Español

El Manual del Usuario ha sido publicado también en otros

idiomas que pueden consultarse tanto en el disco entregado

como en el sitio de APC en Internet: www.apc.com

Adendo Multilíngüe do Manual

do Usuário Português

O Manual do Usuário encontra-se disponível em outras

línguas no CD fornecido com o produto ou no website da

APC: www.apc.com

Supplemento linguistico

al Manuale dell’utente Italiano

Questo Manuale dell’utente è disponibile in diverse lingue

sul CD-ROM fornito e sul sito Web APC www.apc.com

Jazykový doplněk Uživatelské

příručky Česky

Uživatelská příručka je k dispozici v dalších jazycích na

dodávaném CD a na internetové stránce APC na adrese

www.apc.com

Felhasználói kézikönyv nyelvi

kiegészítés Magyar

A felhasználói kézikönyv más nyelveken is megtalálható a

mellékelt CD-n és az APC honlapján: www.apc.com

Informacja dotycząca wersji językowych

instrukcji obsługi Polski

Instrukcja obsługi jest dostępna w innych językach na

dostarczonym dysku kompaktowym oraz w witrynie

internetowej firmy APC pod adresem www.apc.com

Дополнение: руководство по

эксплуатации на других

языках На русском языке

Руководство по эксплуатации на других языках записано

на поставляемом компакт-диске; кроме того, его можно

загрузить с web-сайта компании APC, www.apc.com

Bahasa Tambahan Petunjuk

Pemakai Bahasa Indonesia

Petunjuk Pemakai tersedia dalam berbagai bahasa, dalam CD

yang disediakan dan website APC, www.apc.com

ภาคผนวกสําหรับภาษาของคูมือการใช ภาษาไทย

สามารถอานคูมือการใชภาษาอื่นๆ

ไดจากแผนซีดีที่ใหและจากเว็บไซตของ APC ที่

www.apc.com.

Summary of content (15 pages)

PAGE 1
User Manual Language Addendum English Informacja dotycząca wersji językowych instrukcji obsługi Polski The User Manual is accessible from the supplied CD and the Instrukcja obsługi jest dostępna w innych językach na APC web site, www.apc.com. dostarczonym dysku kompaktowym oraz w witrynie Supplément multilingue du guide d’utilisation Français Le Guide d’utilisation est disponible dans d’autres langues sur le CD fourni, de même qu’au site Web de APC, www.apc.com.
PAGE 2
PAGE 3
User Manual English SURT192XLBP External Battery Pack For Use With Smart-UPS® RT 3000/5000/7500/10000 VA Uninterruptible Power Supply 990-1387A 09/2003
PAGE 4
PAGE 5
Introduction The SURT192XLBP connects to the APC Smart-UPS® RT 3000/5000/7500/10000 VA. Together these units provide extended protection from blackouts, brownouts, sags, and surges for your computer and other critical electronic equipment. 1: INSTALLATION Refer to the Safety Instruction sheet included with the UPS before installing the batteries. Unpacking Inspect the unit upon receipt. Notify the carrier and dealer if there is damage.
PAGE 6
Installing the External Battery Pack(s) Your UPS model may vary from the model depicted in the diagram. The battery installation procedure is identical for all models. Prior to connecting the batteries, and tie brackets (when used), remove the feet (if installed), from the bottom of the UPS. See diagram. x4 x4 REMOVING BATTERIES FROM THE EXTERNAL BATTERY PACK This unit is heavy. To lighten the unit, remove the batteries.
PAGE 7
3. Install the rear tie brackets (screws included), as shown in the diagrams below. UPS and One External Battery Pack Secure tie brackets 4. UPS and Two External Battery Packs Note: Tie brackets on the center XLBP share a common screw. Connect the green/yellow ground wires (screws included), as shown in the diagrams below. TVSS Ground Wire Connections 5. Connect the rear panel batteries as shown in the diagrams below. Rear Battery Connections 6.
PAGE 8
Installing and Connecting the Front Batteries and Attaching the Bezel 1 2 4 3 2 1 3 4 x9 5 6 4
PAGE 9
RACK MOUNT CONFIGURATION Refer to the Installation Guide included in Rail Kit SURTRK2 for instructions on mounting the UPS and the external battery packs into a rack. NOTE: The external battery packs must be mounted below the UPS in the rack. Installing and Connecting the External Battery Pack(s) 1. Connect the green/yellow ground wires (screws included), as shown in the diagrams below. TVSS Ground Wire Connections 2. Connect the rear panel batteries as shown in the diagrams below.
PAGE 10
Installing and Connecting the Front Batteries and Attaching the Bezel 1 2 1 3 2 3 4 4 x9 5 6 6
PAGE 11
Setting the UPS to Recognize the Battery Pack(s) This configuration affects the accuracy of the runtime calculations that the UPS performs while running on battery power. Settings are made through supplied PowerChute® Business Edition, or PowerChute® Network Shutdown software, optional Smart Slot accessory cards, or Terminal Mode. Refer to the instructions included with the software or accessory cards. See Terminal Mode instructions below.
PAGE 12
5000 VA models: Terminal Mode is a menu driven interface that enables enhanced configuration of the UPS. Connect the serial cable to the serial port on the back of the UPS. When using PowerChute® Network Shutdown software: 1. 2. Open a terminal program. Example: HyperTerminal • From the Desktop, go to Start => Programs => Accessories => Communication =>HyperTerminal. Double-click on the HyperTerminal icon. Follow the prompts to choose a name and select an icon. Disregard the message, “...
PAGE 13
2: STORAGE, MAINTENANCE, AND SERVICE Storage Store the UPS covered and positioned as for proper functioning, in a cool, dry location, with the batteries fully charged. Store at: 50,000 ft (15,000 m) -4° to 140° F (-20 to 60 ° C) Charge the batteries every 6 months. Replacing the Battery Module This UPS has an easy to replace, hot-swappable battery module. Replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and connected equipment on during the procedure.
PAGE 14
3: REGULATORY INFORMATION, CONTACTING APC AND WARRANTY Regulatory Agency Approvals See User Manuals for SURT3000/5000XL 3U and SURT7500/10000XL 6U models for complete regulatory approval listings.
PAGE 15
Contacting APC In the USA … Outside the USA … Refer to the APC web site, www.apc.com/support. Refer to the APC web site, www.apc.com. Select the appropriate country from the country selection field. Select the Support tab at the top of the web page. Limited Warranty American Power Conversion (APC) warrants its products to be free from defects in materials and workmanship for a period of two years from the date of purchase.