Datasheet

ManualsBrandsAPC ManualsPOWERSmart-UPS Network Card, 1kW, 230V, Rack Mountx IEC 60320 C13

Technical Speciﬁcations

APC Smart-UPS SRT 1000VA RM 230V Network Card | SRT1000RMXLI-NC | Downloaded on 05/22/2019 (EST)

APC Smart-UPS SRT 1000VA RM 230V

Network Card

SRT1000RMXLI-NC

• High density, double-conversion on-line power protection with scalable runtime

• Includes: CD with software, Comms cable, Country-speciﬁc detachable power cord,

Documentation CD, Installation guide, Network Management Card, Rack Mounting

brackets, Rack mounting hardware, Rack Mounting support rails, Temperature

Probe, USB cable, Warranty card

Output

Output power capacity 1.0kWatts /1.0kVA

Max Conﬁgurable Power (Watts) 1.0kWatts /1.0kVA

Nominal Output Voltage 230V

Output Voltage Distortion Less than 2%

Output Frequency (sync to mains) 50/60Hz +/- 3 Hz

Other Output Voltages 220, 240

Load Crest Factor 3 : 1

Topology Double Conversion Online

Waveform type Sine wave

Output Connections (6) IEC 320 C13 (Battery Backup)

Bypass Built-in Bypass

Input

Nominal Input Voltage 230V

Input frequency 40 - 70 Hz (auto sensing)

Input Connections British BS1363A, IEC-320 C14, Schuko CEE 7/EU1-16P

Cord Length 1,83meters

Input voltage range for main operations 50-150 (40% Load), 80 - 150V

Number of Power Cords 1

Batteries & Runtime

Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for speciﬁc user applications.

Page 1 of 3

Summary of content (3 pages)

PAGE 1
Technical Speciﬁcations APC Smart-UPS SRT 1000VA RM 230V Network Card | SRT1000RMXLI-NC | Downloaded on 05/22/2019 (EST) APC Smart-UPS SRT 1000VA RM 230V Network Card SRT1000RMXLI-NC • High density, double-conversion on-line power protection with scalable runtime • Includes: CD with software, Comms cable, Country-speciﬁc detachable power cord, Documentation CD, Installation guide, Network Management Card, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, Temperature Probe, USB c
PAGE 2
Technical Speciﬁcations APC Smart-UPS SRT 1000VA RM 230V Network Card | SRT1000RMXLI-NC | Downloaded on 05/22/2019 (EST) Batteries & Runtime Included Battery Modules 1 Typical recharge time 3hour(s) Nominal Battery Voltage 48V Expected Battery Life (years) 3-5 Extendable Run Time 1 Extended Run Options APC-Smart-UPS-SRT-1000VA-RM-230V-Network-Card (Available in Technical Tab on site) Runtime View Runtime Graph (Available in Technical Tab on site) View Runtime Chart (Available in Technical Tab
PAGE 3
Technical Speciﬁcations APC Smart-UPS SRT 1000VA RM 230V Network Card | SRT1000RMXLI-NC | Downloaded on 05/22/2019 (EST) Environmental Operating Temperature 0 - 40 °C Operating Relative Humidity 0 - 95 (non-condensing) % Operating Elevation 0-3000meters Storage Temperature -20 - 50 °C Storage Relative Humidity 0 - 95 (non-condensing) % Storage Elevation 0-15000meters Audible noise at 1 meter from surface of 50.0dBA unit Online thermal dissipation 317.