Installation Guide Smart-UPS™On-Line SRT 2-Post Rack-Mount Rail Kit Package Contents Inspect the contents upon receipt. Notify the carrier and dealer if the unit is damaged.
Install Rails to 2-Post Rack Pem nuts are provided on single side of two rails. Install these rails such that the pem nut is towards the front of the 2-post rack.
SRT1000/SRT1500/SRT2200/SRT3000 UPS Note: UPS and External Battery Pack (XLBP) models may differ in appearance from those depicted in these graphics. The installation process is identical for all models. CAUTION DAMAGE TO EQUIPMENT OR PERSONNEL • The equipment is heavy. Each APCRBC152 battery module weighs 16.4 kg (36.2 lbs) and each APCRBC141 battery module weighs 12.5 kg (27.6 lb). Each APCRBC155 battery module weighs 11 kg (24.25 lb).
suo08 su 08 45 b 71b Install the SRT1000/SRT1500/SRT2200/SRT3000 UPS in a rack See “Install Rails to 2-Post Rack” on page 2 for instructions on rail installation.
suo1026a SRT1000/SRT1500/SRT2200/SRT3000 UPS with one external battery pack suo0837b suo0838b suo0839b suo0840b Smart-UPS SRT 2-Post Rack-Mount Rail Kit 5
Disconnect and remove the battery module from the UPS. See “Tower to rack-mount conversion” on page 3. suo0835b suo0836b 34b suo08 Install the SRT1000/SRT1500/SRT2200/SRT3000 UPS with one external battery pack in a rack See “Install Rails to 2-Post Rack” on page 2 for instructions on rail installation.
suo1029a suo1028a x6 suo1030a suo1031a U PS X LB P suo1032a Smart-UPS SRT 2-Post Rack-Mount Rail Kit suo1033a 7
SRT5K/SRT6K UPS CAUTION DAMAGE TO EQUIPMENT OR PERSONNEL • The equipment is heavy. Each APCRBC140 battery module weighs 17 kg (37 lb). • Always practice safe lifting techniques adequate for the weight of the equipment. • Remove the battery modules before installing the UPS. • Use the battery module handle to carefully slide the battery module in or out of the unit. • Do not use the battery module handle to lift or carry the battery module. • Place the UPS on a table to remove the stabilizer brackets.
su08 su 08 45 b 46b Smart-UPS SRT 2-Post Rack-Mount Rail Kit 9
Install the SRT5K/SRT6K UPS in a rack See “Install Rails to 2-Post Rack” on page 2 for instructions on rail installation.
suo1039a SRT5K/SRT6K UPS with one external battery pack 98b s u0 9 s u08 00b s u08 97b Smart-UPS SRT 2-Post Rack-Mount Rail Kit 11
Disconnect and remove the battery module from the UPS. See “Tower to rack-mount conversion” on page 14. XLBP su0893b s u08 94b UPS 2b su089 Install the SRT5K/SRT6K UPS with one external battery pack in a rack The process for installation of an external battery pack with UPS models SRT8K/SRT10K models is identical to that described for the SRT5K/SRT6K models. See “Install Rails to 2-Post Rack” on page 2 for instructions on rail installation.
suo1041a suo1042a suo1044a suo1043a UPS XLBP x4 suo1045a Smart-UPS SRT 2-Post Rack-Mount Rail Kit suo1046a 13
SRT8K/SRT10K UPS CAUTION DAMAGE TO EQUIPMENT OR PERSONNEL • The equipment is heavy. Each APCRBC140 battery module weighs 17 kg (37 lb). • Always practice safe lifting techniques adequate for the weight of the equipment. • Remove the battery modules before installing the UPS. • Use the battery module handle to carefully slide the battery module in or out of the unit. • Do not use the battery module handle to lift or carry the battery module. • Place the UPS on a table to remove the stabilizer brackets.
s uo0 7 82b Install the SRT8K/SRT10K UPS in a rack See “Install Rails to 2-Post Rack” on page 2 for instructions on rail installation.
suo1050a x4 suo1051a suo1052a Install the SRT8K/SRT10K UPS with one external battery pack in a rack The process for installation of an external battery pack with UPS models SRT8K/SRT10K models is identical to that described for the SRT5K/SRT6K models. Refer to the installation process “Install the SRT5K/SRT6K UPS with one external battery pack in a rack” on page 12. Customer support and warranty information is available at the APC by Schneider Electric web site, www.apc.com.
