User Manual

ManualsBrandsAPC ManualsPOWERAPC Smart-UPS SRT 19" Rail Kit

Tower to Rack-Mount Conversion Guide

Smart-UPS

™

On-Line SRTRK2

Package Contents

Inspect the contents upon receipt. Notify the carrier and dealer if the unit is damaged.

All Models

One Rail Kit with instructions and hardware for

installing rails in a rack.

Rail cleats

SRT5K, 3U models and external battery packs

SRT8K/SRT10K, 6U models SRT6K, 4U models

su04

34a

Summary of content (8 pages)

PAGE 1
Tower to Rack-Mount Conversion Guide Smart-UPS™On-Line SRTRK2 Package Contents Inspect the contents upon receipt. Notify the carrier and dealer if the unit is damaged. All Models SRT5K, 3U models and external battery packs One Rail Kit with instructions and hardware for installing rails in a rack.
PAGE 2
Tower to Rack-Mount Conversion Actual models may differ in appearance from those depicted in these graphics. Installation process is identical for all models. CAUTION DAMAGE TO EQUIPMENT OR PERSONNEL • The equipment is heavy. Each battery module weighs 17 kg (37 lb). • Always practice safe lifting techniques adequate for the weight of the equipment. • Remove the battery modules before installing the UPS. • Use the battery module handle to carefully slide the battery module in or out of the unit.
PAGE 3
Install the SRT5K/SRT6K and SRT5KTFJ model in a rack Refer to the rail kit Installation Guide for instructions on rail installation.
PAGE 4
SRT5K/SRT6K UPS with one external battery pack  s u0 9 s u08 00b 98b   s u08 97b    XLBP su0893b s u08 94b UPS  4 2b su089 Smart-UPS On-Line SRTRK2 Tower to Rack-Mount Conversion
PAGE 5
Install the SRT5K/SRT6K with one external battery pack in a rack The process for installation of an external battery pack with UPS models SRT8K/SRT10K models is identicalal to that described for the SRT5K/SRT6K models. Refer to the rail kit Installation Guide for instructions on rail installation.
PAGE 6
  x4 s u 09 su 0 908a  UPS XL BP 1a su091 SRT8K/SRT10K UPS   s uo0 6 7 84c s uo0 7 85b Smart-UPS On-Line SRTRK2 Tower to Rack-Mount Conversion 09a
PAGE 7
  x4 s uo0 7 81b suo0 7 83a  s uo0 7 82b Install SRT8K/SRT10K UPS in a rack Refer to the rail kit Installation Guide for instructions on rail installation.
PAGE 8
  suo0776a suo0775a x4 x4 suo0777a  x4 suo0779a  suo0778a  The process for installation of an external battery pack with UPS models SRT8K/SRT10K models is identical to that described for the SRT5K/SRT6K models. Refer to the installation process described in the section, Install the SRT5K/SRT6K with one external battery pack. Customer support and warranty information is available at the APC by Schneider Electric web site, www.apc.com. © 2015 APC by Schneider Electric.