User manual

ManualsBrandsAPC Manualselectrical equipment & suppliesSUM48RMXLBP2U

990-1736 01/2004

User Manual

English

APC

APCAPC

APC SUM48RMXLBP2U

SUM48RMXLBP2USUM48RMXLBP2U

SUM48RMXLBP2U

Extended Life (XL) Battery Pack

Extended Life (XL) Battery PackExtended Life (XL) Battery Pack

Extended Life (XL) Battery Pack

For Use With APC Smart

For Use With APC SmartFor Use With APC Smart

For Use With APC Smart-

-UPS

UPSUPS

UPS

®®

Modular

ModularModular

Modular

Uninterruptible Power Supply

Uninterruptible Power SupplyUninterruptible Power Supply

Uninterruptible Power Supply

Summary of content (10 pages)

PAGE 1
User Manual English APC SUM48RMXLBP2U Extended Life (XL) Battery Pack For Use With APC SmartSmart-UPS® Modular Uninterruptible Power Supply 990-1736 01/2004
PAGE 2
PAGE 3
Introduction The SUM48RMXLBP2U connects to the APC Smart-UPS Modular Uninterruptible Power Supply (UPS). Together, these units provide extended protection for your equipment from blackouts, brownouts, sags, and surges. For battery replacement and service information, see the UPS User Manual. 1: INSTALLATION The User Manual and Safety Guide are accessible on the supplied User Manuals CD and on the APC website, www.apc.com. Note: Illustrations in this document might differ slightly from the actual hardware.
PAGE 4
Mount the Battery Pack in the Rack Attention: Install the rails following the instructions in the rail kit.
PAGE 5
TOWER CONFIGURATION Note: Place in final operating location prior to battery reinstallation.
PAGE 6
4
PAGE 7
2: CONNECTION TO THE UPS Connect the Battery Pack(s) to the UPS Connect A to B. (For additional packs, connect C to D.) Note: The UPS can be powered during connection. RACK-MOUNT CONNECTION: TOWER CONNECTION: Program the UPS to Recognize the Correct Number of Battery Pack(s) Attention: This configuration affects the accuracy of the runtime calculations that the UPS performs while running on battery power.
PAGE 8
3. 4. • Click ‘Battery Status’ under ‘General’. Type in the number of external battery packs in the ‘Battery Packs’ dialog box and click ‘Apply’. ALLOW THE UPS TO DETERMINE THE NUMBER OF EXTERNAL BATTERY PACKS BY CONDUCTING A RUNTIME CALIBRATION TEST In order for the UPS to conduct a valid runtime calibration test, the following conditions must be met. The UPS must be 100% charged.
PAGE 9
3: REGULATORY, WARRANTY, AND CONTACT INFORMATION Regulatory Agency Approvals See User Manual for Smart-UPS Modular Uninterruptible Power Supply for complete regulatory approval listings. Declaration of Conformity Contact Information U.S. Customers - Refer to www.apc.com/support. International Customers - Refer to www.apc.com, select the appropriate country from the country selection field, and select the Support tab at the top of the web page.
PAGE 10
Limited Warranty American Power Conversion (APC) warrants its products to be free from defects in materials and workmanship for a period of two years from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products. To obtain service under warranty you must obtain a Returned Material Authorization (RMA) number from customer support.