C Type Power Filter Owner’s Manual Models C5 and C5BLK
Safety Information 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read this manual - Read all of the safety and operating instructions before installing and operating this device. Keep this manual - Retain this manual, and all of the safety information that came with this device. Warnings - Comply with all warnings presented in this manual, as well as any found on the device. Follow Instructions - Follow all operating and use instruction.
Safety Information (continued) 14. Overloading - Do not overload the wall outlet where this device is being connected. Do not overload this device. Ensure the total load to this device does not exceed that which is listed in the Specifications section of this manual. 15. Servicing - There are no user-serviceable components within this device. Removal of any cover from this device may present a shock hazard, and/or void the warranty. 16.
Protect Your Investment Congratulations and thank you for selecting and investing in APC's Model C5 Power Filter. At APC, we know you have made an intelligent choice sure to reward you for many years. To ensure you receive all the benefits and protection that accompany your purchase, please take a few minutes to fill out and mail the enclosed Warranty Registration Card, or complete the online form at www.apc.com.
Class B Labeling and Instruction Manual Requirements Devices subject to Certification must be labeled with an FCC Identifier. Devices subject to Verification or Certification must be labeled with the following compliance statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Table of Contents Safety Information i Protect Your Investment iii Class B Labeling and Instruction Manual Requirements vi Introduction 1 Proven Expertise…Proven Reliability 1 Safety Precautions 2 Package Contents 2 Unit Power Capacity 2 Features 3 Surge Protection 3 Isolated Noise Filter Banks (INFB) 3 10 Outlets 3 Top Panel 4 Top Panel Controls and Indicators 4 Outlet Panel and Side Panel 6 Outlet Panel 6 Side Panel Controls and Indicators 8 Installation 10 Make Connections 10 Apply Power 10 Dimming of t
vi
Introduction Congratulations on your purchase of APC’s C5 Power Filter (Figure 1). This unit will protect your high performance audio and video (AV) system from damaging power surges, spikes and lightning. Protection is guaranteed. Isolated noise filter banks will eliminate EMI/RFI as a source of audio and video signal degradation. Data-line surge protection jacks will stop surges traveling over phone and ethernet lines.
Safety Precautions Please ensure you have read and understand all of the safety information located at the front of this manual. If you have any questions about the safety information, or are concerned that your home may not be properly wired for this equipment, please contact APC Technical Support or a qualified and licensed electrician. Package Contents Note the C5 and C5BLK have the same performance, features and functionality. The only difference is color.
Features The following are major features of the Model C5: Surge Protection The C5 Power Filter provides a high level of surge protection for the voltage going into the unit, thus protecting the devices connected to the unit. Additionally, surge protected coax/radio frequency (RF) connectors are protected against surges traveling over coaxial lines to protect your digital satellite system (DSS), CATV box, or cable modem.
Top Panel The following section describes the controls and indicators on the top panel. Top Panel Controls and Indicators The top panel controls and indicators for the C5 Power Filter are detailed in Figure 2. Each numbered callout refers to the numbered description found immediately below the picture. 2 1 3 4 5 Figure 2.
1 Wiring OK Status Indicator When lit, the receptacle the C5 is plugged into is properly wired. If not lit, one of three wiring problems exists in the building wiring circuit: missing ground, overloaded neutral, or reversed polarity. An electrician should be consulted to resolve the problem. 2 Protection On Status Indicator When lit, the C5 is functioning properly. If the light is extinguished, the C5 has been hit by a surge and the protection circuitry may be damaged.
Outlet Panel and Side Panel The following section describes the functionality of the outlet and side panels. Outlet Panel The outlet panel for the C5 Power Filter is deteailed in Figure 3. Each numbered callout refers to the numbered description found in the following pages. 1 2 5 3 4 Figure 3.
1 AC-Powered Outlets The C5 Power Filter provides for connection of up to ten (10) AC-powered devices. The outlets are arranged according to the type of filtering protection provided for a given application. These Isolated Noise Filter Banks eliminate electromagnetic and radio frequency interference (EMI/RFI) that can negatively impact sound and video quality. APC recommends you plug your devices into the outlets as marked, in order to assure optimum protection for your equipment.
Side Panel Controls and Indicators The side panel connectors for the C5 Power Filter are detailed in Figure 4. Each numbered callout refers to the numbered description found in the following pages. 3 1 4 1 4 2 Figure 4.
1 Surge Protected COAX/RF Connectors The C5 provides surge protection for your CATV system, Cable Modem, DSS, or Antenna system. The surge protection feature prevents surges traveling over Coaxial data lines from damaging the system. Connect the coaxial cable from the CATV or Cable Modem provider to the connector marked “IN.” Connect other cable from the connector marked “OUT” to the device being protected (CATV box or Cable Modem).
Installation The installation of the C5 consists of the following steps: 1. Make connections 2. Apply power Make Connections Prior to connecting equipment to the C5 Power Filter, ensure the unit is functional by connecting the AC Power Cord (provided) on the side panel ( 5 , Figure 4). Once power is applied to the unit, and the unit is powered on, the front panel LEDs will illuminate. Turn the power switch off - all LEDs extinguish.
Technical Specifications The following table contains the specifications for the C5 and C5BLK.
Federal Communications Commission (FCC) Compliance Information This device complies with Part 68 and Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. As required, the bottom of this equipment contains, among other information, the Registration Number and Ringer Equivalence Number (REN) for this equipment.
Troubleshooting This section describes possible causes and solutions for the following problems: • Unit will not turn on. • “Wiring OK Indicator” LED is not illuminated. Unit will not turn on. Probable Cause: Input power cord is not connected properly. Solution: Ensure supplied power cord is connected firmly to the wall outlet. Probable Cause: No power or insufficient power available at the wall outlet. Solution: Ensure the wall outlet has good power by using a voltmeter, or by plugging in another device.
“Wiring OK Indicator” LED is not illuminated. Probable Cause: There are 3 reasons why this LED would not be illuminated: 1. Reversed polarity exists at the wall outlet. 2. Neutral wire is overloaded. 3. Earth ground is missing at the wall outlet. Solution: Operating the unit under such conditions may impact its surge protection performance. Contact an electrician to have them inspect the building or home wiring to fix the problem. Probable Cause: Unit is on but LEDs are turned off.
- 15 -
990-2377 Copyright © 2005 American Power Conversion All rights reserved. The APC AV logo is a registered trademark of American Power Conversion. All other trademarks are the property of their respective owners.
