Specifications
8.80
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Cooling Solutions
Chatsworth Products, Inc.
Power, Cooling and Environmental Monitoring
D
Cabinets;Cooling Accessories/15567
Index1.Support and Supplies//Physical Su pport Structure//Cabinets
CHATSWORTH PRODUCTS INC (CPI)
V
ertical Exhaust Duct is used with the Air Dam Kit and Snap-In Filler Panels on an
F-Series TeraFrame Cabinet to create a ducted exhaust cabinet. Use on cabinets with
a perforated front door, a solid rear door, solid side panels and a server top panel
with a knockout for the duct. For best results, add an Airflow Director and a Rear Door
Sealing Kit. Vertical Exhaust Duct isolates and guides hot exhaust air from the back of
the cabinet to an overhead drop ceiling plenum to create a closed hot air return.
FEATURES
• Use on F-Series TeraFrame Cabinet Systems that are 45.1 in. to 51.0 in deep
• Available in two heights: short (20 in. to 34 in. high) and tall (34 in. to
60 in. high)
• Can be ordered as an accessory or pre-installed on the cabinet
• Other colors available; call for products not listed
• Also available for GF-Series GlobalFrame Cabinet
Cabinets;Cooling Accessories/13350
I
ndex1.Support and Supplies//Physical Sup port Structure//Accessories
CHATSWORTH PRODUCTS INC (CPI) PR12010V2-21808.eps
KoldLok seals cable openings in raised floors with a
n impact-resistant polypropylene
grommet insert, which protects cables as they pass through the cut in the raised
floor tile, and a double-layer brush closure that seals around cables to prevent cold
air from escaping through the hole in the floor.
FEATURES
• Protect cables and allows easy addition or subtraction of cables
• Seals the space around cables with two layers of brush closure
• For indoor use only in environmentally controlled areas
• The Integral Raised Floor Grommet is a one piece unit used in new construction
to cover holes up to 9 3/16 in. x 6 3/4 in.
• The Surface Mount Floor Grommet is a two piece unit used to cover existing
holes up to 10 in. x 7 1/4 in.
• The Mini Grommet is a two piece unit used to cover new or existing holes up to
6 in. x 4 in.
• Material:
- Housing is polypropylene
- Brush holders are aluminum extrusion
- Brush filaments are nylon 6
Finish: black
Vertical Exhaust Duct
Anixter No. Vendor No. Description
387658 34370-C00 Vertical Exhaust Duct for 23.6 in. or 27.6 in. W
cabinets, 20 in. to 34 in. H
387659 34370-C01 Vertical Exhaust Duct for 23.6 in. or 27.6 in. W
cabinets, 34 in. to 60 in. H
445194 34370-C02 Vertical Exhaust Duct for 31.5 in. W cabinets,
20 in. to 34 in. H
445196 34370-C03 Vertical Exhaust Duct for 31.5 in. W cabinets,
34 in. to 60 in. H
338345 34570-C00 Airflow Director
338346 34573-000 Rear Door Sealing Kit for 23.6 in. or
27.6 in. W cabinets
445200 34573-C01 Rear Door Sealing Kit for 31.5 in. W cabinets
KoldLok Raised Floor Grommet
Anixter No. Vendor No. Description
324473 13571-002 Integral Raised Floor Grommet, 8 in. x 4 in.
cable opening, 10 pack
324474 13576-002 Surface Mount Floor Grommet, 8 in. x 4 in.
cable opening, 10 pack
376875 13871-002 Mini Grommet, 5 in. x 2.5 in. cable opening,
10 pack