Product Info

Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Cong
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Cong
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Cong
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Cong
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Cong
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Cong
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Cong
Tech Stats/Info
17
Synchronized Logging Mode
In the synchronized logging mode, multiple sensors can be wirelessly synchronized with each other. Each sensor’s data
will be recorded to the on-board ash memory.
To Start Recording
Undock the sensors after conguration. After a few seconds, they will start recording to their ash memory. When
within wireless contact with each other, they will synchronize their clocks. To start an additional recording in a
separate le, connect and disconnect the sensors from their cables or Docking Stations. No re-conguration is
necessary.
To Import Recorded Data
Dock the sensor(s). Click on the “Import Data” button in the toolbar.
Low Power Logging Mode
In the low power logging mode, each sensor’s radio is turned o to save power. The sensor’s will be synchronized at
the start of recording, but they will not be actively synchronized while logging and some level of clock drift will occur
during long recordings.
To Start Recording
Undock the sensors after conguration. The sensors will stop recording once they are docked again.
No re-conguration is necessary.
To Import Recorded Data
Dock the sensor(s). Click on the “Import Data” button in the toolbar.