User manual

English
12
Advanced control
Control by a light desk via DMX
Receive DMX data by radio
› Connect the WAPP transceiver to a lighting conso-
le via DMX cable.
› Connect the WAPP transceiver to the target device
via DMX cable.
› Make sure the APP is connected to the WAPP.
› Select a group to control
› Select the „DMX receiver“ in the „Control Mode“
menu.
› Make sure the APP is connected to the WAPP.
› Select a group to control.
› In the „Control Mode“ menu, select the „DMX
Transmitter“.
› In the menu „Lamp Setup“ the Ape Labs devices
can be assigned DMX addresses.