Instructions / Assembly

2
OFF
Note:
COUNTERTOP FILTER HOOK UP:
Step 2:
Step 3: Step 4:
Step 1:
1
2
3
ON
Remove your faucet’s aerator (if there is one)
by turning it counter-clockwise.
Screw the filter’s diverter valve
onto your faucet. Make sure
the rubber washer is in place in
the diverter valve. If the valve
does not fit, try the other valve-
adapters provided.
Turn the faucet on to FULL (cold water only) to supply
maximum water pressure to the system. Tap water will
flow out the bottom of the diverter head. Simply turn the
black knob on the diverter head Clockwise to direct the
water into the system.
Make sure the water is
turned off completely.
This countertop water filter comes complete with the filter cartridge included inside,
wrench, and two extra valve adaptors (13/16” and 12/16” I.D.) are provided to fit
various faucet sizes.
4