Owner Manual

Before Installation:

• Inspect the system: Please take the system and all the

components out of the box. Inspect the system and all the

connection fittings carefully, make sure nothing is damaged

during shipping. If any part is cracked or broken, please do

not proceed with the installation and contact APEC or your

distributor for an exchange or diagnosis.

• Use the whole house water filter on a potable, safe-to-drink,

home COLD water supply only. The filter cartridge WILL NOT

make unsafe water safe to drink.

• Protect the whole house water filter and piping from freezing.

Water freezing in the water filter will damage it.

• This water filter system will withstand up to 90 psi water pres-

sure. If your house’s water pressure is higher than 90 psi, in-

stall a pressure reducing valve before the system is installed.

• DO NOT install on HOT WATER. The temperature of the

water supply to the water filter must be between 40F

minimum and 100 F maximum.

• DO NOT solder any fittings directly on the unit. The heat

from the soldering process will damage the unit.

• DO NOT install the water filter in an outside location or

anywhere it will be exposed to direct sunlight.

This manual is copyrighted by APEC Inc. Under the copyright laws, this manual

may not be reproduced in any form, in whole or part, without the prior written

consent of APEC Inc. Manual print ver. 2.3, 2019 Nov.