Installation Guide

15
3. Point W Waste water connection:
Tubing color: Black tubing. Connect the BLACK tubing from the RO to the Drain Saddle.
Fitting type: Quick-Connect fitting on drain saddle. No teflon tape.
Do Not add ”insert” into Black tubing. Simply push tubing into port.
4. Point A System water inlet (to Stage 1 prefilter) connection:
Tubing color: Red tubing. Connect the RED tubing from the Feed Water Valve to the RO’s stage -1
pre-filter.
Fitting type: Quick Connect fitting See Fig.1 on page 4. Simply push the Red tubing into the Quick
Connect fitting. No Inserts, Sleeves or Nuts are needed to secure the connection. No
teflon tape is needed here.
5. Point H Stage-5 filtered water to faucet connection:
Tubing color: Clear tubing. Connect the CLEAR tubing from the faucet base stud to the Stage-5 filter’s
outflow end at point H. (See “Flow -->” arrow on the filter for flow direction.)
Fitting type: Quick Connect fitting
See Fig.1 on page 4. Simply push the Clear tubing into outlet
on the 5th stage filter. No Inserts, Sleeves or Nuts are needed to secure the
connection. No Teflon tape is needed here.
Please Note: There are two end plugs on the stage-5 filter that has to be removed before
inserting the tubing. Please refer to Fig. 1A on page 4 for removal instruction.
6. Point G Stage-5 filter’s T-fitting connection:
Tubing color: Yellow tubing. Connect the YELLOW tubing to Stage-5 filter’s T-fitting.
Fitting type: Quick Connect fitting See Fig.1. Simply push the Yellow tubing into the 5th stage filter’s
T Fitting. No Inserts, Sleeves or Nuts are needed to secure the connection. No Teflon tape
needed here.
(Note: If the unit comes with a UV Light, connect the Yellow tubing to the T- fitting on the
UV, as the Stage 5 filter will not have a T-fitting).
15
3
.
P
oint
W
W
aste water connection:
W
W
Tubing color
:
B
lack tubing. Connect the BLACK tubing
f
r
om
th
e
R
O
t
o
th
e
Dr
a
in
Sadd
l
e
.
F
itting type:
Q
uic
k
-
Connect
f
itting on drain saddle. No te
f
lon tape.
Do
N
ot
add
”in
se
rt” into Black tubing. Simply push tubing into port.
4
. P
o
int
A
System water inlet (to Stage 1 pre
f
ilter) connection
:
Tubing color
:
R
e
d tubing. Connect the RED tubing
f
r
o
m the Feed Water Valve to the RO’s stage -1
pre-
f
ilter.
F
itting type: Quick Connect
f
itting See Fig.1
on
page
4
. Simply push the Red tubing into the Quick
Connect
f
itting. No Inserts, Sleeves or Nuts are needed to secure the connection. No
te
f
lon tape is needed here.
5
. P
oi
nt
H Stag
e
-
5
f
iltered water to
f
aucet connection
:
Tubing color
:
Clear tubing. Connect the CLEAR tubing
f
r
o
m the
f
aucet base stud to the Stage-5
f
ilter’s
outflow
e
n
d
a
t
w
po
i
nt
H.
(
See “Flow --
>
”
arrow on the
f
ilter
f
or
f
low direction.)
F
itting type: Quick Connect
f
itting See Fig.1
on
page
4
. Simply push the Clear tubing into outlet
on the 5th stage
f
ilter. No Inserts, Sleeves or Nuts are needed to secure the
connection. No Te
f
lon t
ap
e is needed here.
Please Note:
There are two end plugs on the stage-5 filter that has to be removed before
inserting the tubing
. Please refer to Fig. 1A on page 4 for removal instruction.
6
. P
o
int
G
Stag
e
-
5
f
ilter’s T-
f
itting connection
:
Tubing color
:
Y
ellow tubing. Connect the YELLOW tubing to Stage-5 filter’s T-fitting.
Y
Y
F
ittin
g
ty
pe
: Quick Connect
f
ittin
g
See Fi
g.
1.
Sim
pl
y
pu
sh the Yellow tubi
ng
into the 5th st
ag
e
f
ilter’s
T Fitti
ng
. No Inserts, Sleeves or Nuts are needed to secure the connection. No Te
f
lon t
ap
e
n
ee
ded
h
e
re
.
(
N
ote
:
I
f
the unit comes with a UV Ligh
t
, connect the Yellow tubing to the T-
f
itting on the
UV, as the Stage 5
f
ilter will not have a T-
f
itting
).