Installation Guide

20
Option: Recommend to add a little bit lubricant on double o-rings.
5) Check for leaks!
6) Drain the first tank of water (through faucet) to flush out the new membrane! The 2
nd
tank
of water is ready for use.
Fig. 14A
Fig. 14B
How to Replace Stage-5 Carbon Filter:
Replace this last filter at the same time you replace the stage-4 membrane.
1) Remove the OLD filter: See Fig.14 A. Disconnect the output tubing from point H. Remove the
T-fitting from filter’s right hand port. (point J). Discard the used filter.
2). The new Stage 5 carbon will come with two end plugs on the stage 5 filter that has to be
removed before inserting the tubing. Please refer to Fig. 1A on page 4 for removal instruction.
3) Use some mild bleach solution to rinse the Tee-Fitting and Tubing end. This is to prevent
contamination.
4) Connect the Tee-Fitting to point J and pure water output tubing to point H. Make sure the
“FLOW Æ” on the filter is pointing to the pure water output direction. Only this filter change
needs bleach sanitizing. Do Not apply chlorine/ bleach in anyway to Membrane for it will
damage the membrane!
5) Check for leaks!
* * * End Filter Change Section * * *
20
Option: Recommen
d
to a
dd
a
l
itt
l
e
b
it
l
u
b
ricant on
d
ou
bl
e
o
-
ri
n
g
s.
5
)
Che
c
k
f
or leaks
!
6
)
Drain the
f
irst tank o
f
water (through
f
aucet) to
f
lush out the new membrane! Th
e
2
n
d
t
a
nk
of
water is ready
f
or use.
Fig. 14
A
F
i
g. 14
B
How to Replace Stage-5 Carbon Filter:
R
eplace this last
f
ilter at the same time you replace the stage-4 membrane.
1
)
R
e
move the OLD
f
ilter: See Fig.14
A
. Disconnect the output tubing
f
rom po
i
nt
H
. Remove the
T-
f
itting
f
rom
f
ilter’s right hand port.
(
po
i
nt
J
)
. Discard the used
f
ilter
.
2)
. The new St
ag
e 5 carbon will come with two end
pl
ug
s on the sta
ge
5
f
ilter that has to be
removed be
f
ore inserting the tubing. Please re
f
er to Fig. 1
A
on
page
4
f
or
r
em
ov
al i
ns
tr
uc
ti
on
.
3)
Use some mild bleach solution to rinse the
T
ee-Fitting and Tubing end. This is to prevent
TT
c
ontamination.
4)
Co
nn
ec
t th
e
T
ee-Fitting to
T
T
po
i
nt
J
and pure water output tubing to po
i
nt
H
.
Mak
e
su
re
the
“FLO
W
Æ
”
on the
f
ilter is pointing to the pure wate
r
output direction. Only this
f
ilter change
needs bleach sanitizing. Do
N
o
t
apply chlorine/ bleach in anyway to Membrane
f
or it will
d
amage the membrane!
5
)
C
h
ec
k
fo
r l
ea
k
s!
* * * End Filter Change Section * *
*