Installation Guide

8
Test for leaks at this point: Close the Needle Valve (turn needle handle clockwise all the way in to
close). Turn ON the cold water supply to the sink faucet. If the Needle Valve or the Adaptor leaks, check
the connection and try applying more Teflon tape or tighten the brass nut some more to stop the leak.
Fig. 5C
Fig. 5D Fig. 5E
4. Needle Valve: See Fig. 5C. Screw the Needle Valve onto the Adaptor tightly. Apply 6-8 rounds of
Teflon tape onto Needle Valve before attaching it to the Adaptor.
To open needle valve: Turn needle handle counter-clockwise.
To close needle valve: Turn needle handle clockwise.
8
Test for leaks at this point:
p
Close the Needle Valve (turn needle handle
clockwise all the way in to
c
lose). Turn ON the cold water supply to the sink
f
aucet. I
f
the Needle Valve or the Adaptor leaks, check
the connection and try applying more Te
f
lon tape or tighten the brass nut some more to stop the leak.
Fig. 5
C
F
i
g. 5
D
F
i
g. 5
E
4
. Needle Valve
:
See
Fig. 5
C
. Screw the Needle Valve onto the Adaptor tightly. Apply 6-8 rounds o
f
Te
f
lon tape onto Needle Valve be
f
ore attaching it to the Adaptor.
T
o
open
needle valve
:
T
urn needle handle counter-clockwise.
TT
T
o
c
l
ose
needle valve:
T
urn needle handle clockwise.
TT