Installation Guide

16
Option: Ice-maker Connection
If you want to connect product water from the RO to your ice-maker, you will need:
xOne T-fitting, preferably the quick-connect type fitting
xExtra 1/4" tubing long enough to go from the RO system to your ice-maker
xOptional: One shut-off valve, preferably the quick-connect type.
See Fig.13. Before connecting the product water line from Point Z to H, add a T-fitting between point Z
to H to divert product water to both the ice-maker and the faucet.
Using RO for Ice-maker only:
If you want the RO to feed your ice-maker (fridge) only, you should still connect the RO faucet as a
2nd outlet. This allows you to drain the tank, flush new filters through the faucet rather than through
your icemaker line. You can hang the faucet by the system and not mount it.
Option: Multiple Outputs - Add Shut Off Valve:
If your RO is feeding several output points (icemaker, fridge, bathroom), you should add a Shut-Off
valve to each output line (except the RO spigot line). This way, if you ever need to diagnose a problem
in the system, you can easily shut off these lines to isolate the water flow for accurate troubleshooting.
Fig. 13
Shut O Valve
(Recommended)
Tee tting for
icemaker
Z
H
G
Y
1
6
Option
:
p
Ice
-
m
a
k
e
r
Co
nn
ec
ti
on
If
y
ou want to connect
p
roduct water
f
rom the RO to
yo
ur ice-maker,
yo
u will need
:
x
 One T-
f
itting, pre
f
erably the quick-connect type
f
itting
x

E
xtra 1/4" tubing long enough to go
f
rom the RO system to your ice-make
r
x
 Optional: One shut-o
ff
valve, pre
f
erably the quick-connect type.
Se
e
F
i
g.13. Be
f
ore connecting the product water line
f
rom Point
Z
to
H
, add a T-
f
itting between point
Z
t
o
H
to divert product water to both the ice-maker and the
f
aucet.
Using RO
f
or Ice-maker only:
If
you want the RO to
f
eed your ice-maker (
f
ridge) only,
y
ou should still connect the RO
f
aucet as a
2n
d
ou
tl
e
t. This allows you to drain the tank,
f
lush new
f
ilters through the
f
aucet rather than through
your icemaker line. You can hang the
f
aucet by the system and not mount it.
Op
tion
:
p
Mult
ip
le Out
pu
ts - Add Shut Off V
a
lve:
V
V
If
your RO is
f
eeding several output points (icemaker,
f
ridge, bathroom), you should add a
S
h
u
t-
Off
valve to each output line (except the RO spigot line). This way, i
f
you ever need to diagnose a problem
i
n the system, you can easily shut o
ff
these lines to isolate the water
f
low
f
or accurate troubleshooting.
F
i
g. 13
S
hut O

Valv
e
(
Recommen
d
e
d
)
Tee tting for
i
cem
ak
e
r
Z
Z
H
G
Y
Y