Installation Guide

35
OTHER INFORMATION
AirGap Faucet Installation
There are 3 colored tubings on your Air-Gap faucet. At the end of each 1/4” tubing there is a
“Quick Connect” fitting. The Quick Connect fittings is used to connect the Pure and Discharge water
line from the RO unit to the Air Gap Faucet.
To connect the lines, simply insert each line into the fitting port tightly.
Hook-Up:
1. Assemble the faucet: There is a plastic “filler tube” in the slot next to the faucet’s on/off black le-
ver. Remove this filler-tube, and immediately insert the faucet spout into the slot to prevent the black
lever from falling out of its socket. Do Not press down the black lever until the spout is inserted
into the slot.
2. Please connect each tubing to your RO system and drain outlet as follows:
Blue 1/4” tubing: Connect the 1/4” Blue line from the Air-Gap faucet to the RO’s 1/4” Output
CLEAR Line (which is hooked up to the Stage-5 filter output port). See Fig.19&20
Red 1/4” tubing: Connect the 1/4” Red line from the Air-Gap faucet to the RO’s 1/4” BLACK Drain
Line on your RO system. See Fig.19&20
Black 3/8” tubing: Connect the 3/8” Black line on the Air-Gap faucet to the new 3/8” Drain Saddle
provided. See Fig.20
Fig. 19 Fig. 20
35
O
THER INF
O
RMATI
O
N
A
irGap Faucet Installatio
n
There are 3 colored tubi
ng
s on
y
our Air-Ga
p
f
aucet. At the end o
f
each 1/4” tubi
ng
there is a
“
Quick Connect”
f
itting. The Quick Connect
f
ittings is used to connect the Pure and Discharge wate
r
l
ine
f
rom the RO unit to the Air Gap Faucet.
To connect the lines, simply insert each line into the
f
itting port tightly.
Hook-Up:
1. Assemble the
f
aucet: There is a plastic “
f
iller tube” in the slot next to the
f
aucet’s on/o
ff
black l
e
-
ver. Remove this
f
iller-tube, and immediately insert the
f
aucet spout into the slot to prevent the black
l
ever
f
rom
f
alling out o
f
its socket. D
o
N
ot
press down the black lever until the spout is inserted
i
nt
o
th
e
s
l
o
t.
2
. Please connect each tubing to your RO system and drain outlet as
f
ollows
:
Blue 1/4” tubing
:
/
g
Connect the 1/4” Bl
ue
line
f
rom the Air-Gap
f
aucet to the RO’s 1/4”
Output
p
C
LE
A
R Lin
e
(
which is hooked
up
to the St
ag
e-5 filter out
pu
t
po
rt
).
See Fi
g.
19&2
0
Red 1/4” tubing:
/g
Connect the 1/4” R
ed
line
f
rom the Air-Gap
f
aucet to the RO’s 1/4”
B
L
AC
K Dr
a
in
L
in
e
on your RO system.
See Fig.19&2
0
Black 3/8” tubin
g:
/g
Connect the 3/8” Bl
ack
line on the Air-G
ap
faucet to the new 3/8” Drain Saddle
k
provided. See Fig.2
0
F
i
g. 1
9
F
i
g. 2
0