Owner's Manual

Pre Installation Preparation:

The media in the Futura Conditioner is recommended to be soaked by water for 15 to 20 minutes before

usage. The salt free ceramic media has already been placed in the Futura media tank by the manufacturer.

Place the Futura Conditioner at the location of installation, as the tank will be heavy to move once filled

with water. Once the system input/output connections are connected, please turn on the incoming water

supply to fill the Futura Conditioner and soak the media for 15-20 minutes before using water at the home.

System Installation:

This is an overview for system installation

1. Turn off water supply where it enters the building.

2. Install a shut off valve (if needed) then install the Whole House Carbon Filter in the vertical position.

Make sure the flow direction is correct. Plumbing pipes are not designed to support the weight of the

filter. Use a mounting bracket to secure the Whole House Carbon Filter to the wall. Be sure to remove the

plastic wrap on the filter before installing the filter. (See installation guide for Whole House Carbon Filter

for more detail information)

INCOMING WATER SUPPLY

OUT

INOUT

WALL

INCOMING WATER SUPPLY

UPFLOW

DOWNFLOW

INLET

INPUT

OUTPUT

OUT GOING WATER TO HOUSE

Shut off Valve

(Optional)