System information

Display Freeze
Procedure Using the Remote Controller:
1. Press [FREEZE] to pause display.
2. To exit, press on [FREEZE] again.
This function is available only on the remote
controller.
Image Enhance
Image enhancement capabilities include ability to control Brightness, Contrast, Saturation and Hue of
each camera. Recording (or recorded videos) will be affected by these settings.
Procedure Using the Remote Controller:
1. Press [DISPLAY] to adjust Brightness, Contrast, Saturation and Hue.
2. Press [UP] or [DOWN] to select image enhancement option.
3. Press [LEFT], [RIGHT], [+] or [-] to increase or decrease values.
4. Press [ENTER] to save settings and go back to Live View. Or, press [DISPLAY] to exit, without saving
changes.
Procedure Using the Control Panel:
1. In LIVE VIEW, press [MODE].
2. Select Display by pressing [UP]/[DOWN] and [SELECT].
3. Press [UP] or [DOWN] to select image enhancement option.
3. Press [LEFT] or [RIGHT] to increase or decrease value for that particular option. 4. Press [SELECT]
to save settings and go back to LIVE VIEW.
5. Press [BACK] to exit without saving changes.
NOTE: Values are displayed on the right, indicated from numbers 1-25. The default value for all images enhance
options is 12.
24
Manual / Forced Recording
Procedure Using the Remote Controller:
Press [RECORD] to start manual or forced
recording. Press [RECORD] again to exit or
stop recording.
Procedure Using the Control Panel:
1. In LIVE VIEW, press [MODE].
2. Select Forced Recording by pressing [SELECT]. This will bring you back to LIVE VIEW. The Forced
Recording icon will indicate that the DVR is currently on forced recording mode.
3. In LIVE VIEW mode, press [BACK] to stop recording. In other modes such as SETUP or SEARCH,
pressing [BACK] will not stop the recording.
Procedure Using the Remote Controller:
1. Press [AUDIO] to modify audio settings. Press on [LEFT], [RIGHT], [+] or [-] to increase or decrease
output volume.
2. Press [1], [2], [3], … or [ENTER] to select audio channel.
3. Press [AUDIO] again to exit.
4. Press on [FREEZE] to mute output volume.
Procedure Using the Control Panel:
1. In LIVE VIEW, press [MODE].
2. Select Audio by pressing [UP]/[DOWN] then [SELECT].
3. Press on [LEFT] or [RIGHT] to increase or decrease output volume.
4. Press [SELECT] repeatedly to switch audio channels.
5. Press [BACK] to go back to LIVE VIEW.
Live Audio
25