Manualshelf

System information

ManualsBrandsAPEC ManualsComputer equipmentTVR 3000
11121314151617181920
Relay Control is used to manually toggle relays as ON or OFF. A red-colored relay is ON. A transparent
relay is OFF. A relay with a heavy border is the currently selected relay.
Procedure Using Remote Controller:
1. Press [RELAY].
2. Press [LEFT], [RIGHT], [+] or [-] to select username.
3.Press[DOWN]tomovetothepasswordeld.Usethenumerickeystoenterthepasswordthenpress
[ENTER].
4. Press [1], [2], [3]… to toggle relay 1, 2 (and so on) as ON or OFF. Alternatively, press [LEFT] or
[RIGHT] to select a relay, then press [ENTER] to toggle the status of the relay.
5. Press [RELAY] again or [LIVE] to go back to LIVE VIEW.
Procedure Using Control Panel:
1. In LIVE VIEW, press [MODE].
2. Select Relay by pressing [UP]/[DOWN] then [SELECT].
3. Select username by pressing [LEFT/RIGHT].
4.Press[DOWN]tomovetothepasswordeld.Usetheon-screenkeyboardtotypethepassword.
5. Press [LEFT] or [RIGHT] to select a relay, then press [SELECT] to toggle the status of the relay.
6. Press [BACK] to go back to LIVE VIEW.
Relay Control
26
PTZ Control
To use PTZ Control, ensure that your camera is a PTZ (Pan/Tilt/Zoom) camera.
An alert stating, NOT A PTZ CAMERA will display when you try to use PTZ Control for non-PTZ
cameras.
Procedure Using the Remote Controller:
1. Press [PTZ] to enter PTZ Control.
2. Press [UP], [DOWN], [LEFT] or [RIGHT] to control the direction of the PTZ camera.
3. Press ZOOM [+] or [-] to zoom in or out.
4. Press FOCUS [+] or [-] to adjust focus.
5. Press IRIS [+] or [-] to adjust amount of light captured by the camera.
6. Press [PTZ] again to exit.
Procedure Using the Control Panel:
1. In LIVE VIEW, press [MODE].
2. Select PTZ by pressing [UP]/[DOWN] then [SELECT].
3. Press [UP], [DOWN], [LEFT] or [RIGHT] to control the direction of the PTZ camera.
3. Press [SELECT] to change the function of [UP] and [DOWN] to zoom in or out, and the function of
[LEFT] and [RIGHT] to focus in or out. Iris control is not supported by the Control Panel.
5. Press [SELECT] again to change the function of [UP], [DOWN], [LEFT] and [RIGHT] to pan/tilt.
6. Press [BACK] to go back to LIVE VIEW.
27