System information

SETUP MODE

Procedure Using the Remote Controller or Control Panel:

1. Enter SETUP by pressing the [SETUP] button on the remote controller or selecting Setup from the

Main Menu.

2. Choose your User Name using [LEFT], [RIGHT], [+] or [-] and then press [DOWN]. Only ADMIN has

access rights to Setup. Default system user names are ADMIN, USER1 TO USER9.

3. Key-in Password and press [ENTER]. The default password for ADMIN is 5678. Refer to page 37 to

learn how to change password.

When you key in an invalid password, system will indicate “Password INVALID”. Simply key-in the cor-

rect password afterwards.

Once you are logged in SETUP, you can access system settings for: System, Recording, Event, PTZ

and Language.

Note:

This function is only available if current user’s Login ID is authorized to go into SETUP mode.

System Setup gives you access to System Information, Date/Time, Network Settings, User, OSD and

Tools.

Procedure:

1. In SETUP, go to System and press [ENTER/SELECT] or [RIGHT] button to view sub-menus.

2. To view/modify settings under the sub-menus, use [UP] or [DOWN] to select the sub-menu and press

[ENTER/SELECT].

System