System information

OSD

OSD sets screen display for the DVR.

Procedure Using the Remote Controller or Control Panel:

1. To change settings, select the option that you want to modify by pressing [UP] or [DOWN].

2. Switch between ON or OFF by pressing [LEFT], [RIGHT], [+] or [-].

3. Press [ENTER] or [SELECT] to save settings. Press [SETUP] or [BACK] to exit without saving.

OSD Setup

1. Date/Time: Displays time & date

2. Status/Icons: Displays status indicators and icons

3. Camera OSD: Displays camera title

4. Camera Label: Allows you to change camera label

5. Cycle: Allows you to change cycle delay time

Bydefault,therstthreeoptionsarechecked.

To edit Camera Labels, please follow the steps below:

1. Enter SETUP > OSD.

2. Select Camera Label and press [ENTER/SELECT].

3. Select which camera you want to change by pressing [LEFT], [RIGHT], [+] or [-], then press [ENTER/

SELECT].

4. UsingtheOn-ScreenKeyboard,llinyournewcameralabelandpress[ENTER/SELECT]tosave

your settings. Up to 6 characters for camera labels are allowed and only English characters are

allowed.