System information

Tools
This provides tools for formatting hard
drives, changing the video signal type and
updatingtheDVRServerrmware.
1. To format new hard disk, select Format New Hard
Disk.Youwillbeaskedtoconrmyourrequest,se-
lectYEStoconrmorNOtocancel.
2. To format USB hard disk, select Format USB Hard
Disk.Youwillbeaskedtoconrmyourrequest,se-
lectYEStoconrmorNOtocancel.
3. ToreverttheDVRtomanufacturingdefaultcongu-
ration, select Restore System Defaults. You will be
askedtoconrmyourrequest,selectYEStocon-
rmorNOtocancel.
To change the Video Signal type, please follow the steps below:
1. Under System settings, select Tools->Video Signal
using [UP], [DOWN] and [ENTER/SELECT].
2. Change to your intended video signal by selecting
the option and press [ENTER/SELECT] to save
your settings. Press [SETUP], [LEFT] or [BACK] to
exit without saving.
3. You will need to restart your DVR before the change
will take effect. Push the reset button of the DVR to
reboot.
40
To Update the Version of your DVR Server, please follow the steps below:
1. Under System settings, select Tools->Update DVR.
2. Press [UP] or [DOWN] to select update either by
Network or Flash Disk and press [ENTER/SE-
LECT]. If you choose updating by Flash Disk,
make sure the Flash Disk is properly attached to
the USB port.
3. If you choose updating by Network, enter the
Server IP and password and press [ENTER/SE-
LECT]. Press [UP] or [DOWN] to move between
elds.Usethenumerickeysontheremotecon-
troller to input data, or press [ENTER/SELECT]
whiletheeldsareemptytousetheOn-Screen
Keyboard.
4. Aconrmation messagewill popup. SelectYES toupdate orNO ifyou donot wantto update.
(Make sure that your DVR can connect to the Server IP. Check your network settings.) The total
length of update will take about 10~15 minutes via LAN connection.
5. You will need to restart your DVR to before the changes will take effect. Push the reset button of the
DVR to reboot.
Please contact your nearest distributor for the Server IP and password.
41