System information

INSTALLATION AND SAFEGUARDS
All the safety and operating instructions should be read before the unit is operated.
Environment Condition for Installation
To prevent electric shock or other hazards, do not expose units to rain, moisture or dust.
This unit should be located in an area with low humidity and minimum dust.
Place this unit in a well-ventilated place and do not place heat-generating objects on this unit.
This unit should not be located in an area where it is likely to be subjected to mechanical
shocks.
Before You Start
This unit should be operated only from the type of power source indicated on the manufacturer’s label.
Notes
Be aware thoroughly about the power connection before installation of the unit.
Repairs should be referred to the supplier or to the manufacturer.
There are sensitive parts in the equipment. Do not dismantle the equipment.
Power cord should be arranged safely. Do not touch power cord with wet hands.
Do not use loose plug or damaged power cable.
Do not use benzene, thinner or alcohol for cleaning the product. It could damage the
product.
Do not touch exposed terminals.
To switch off the system, simply unplug power cord from socket, and then switch
off the peripheral equipment.
When smoke is seen coming from the equipment, immediately unplug the power cord from
 powersourcetopreventreorelectricshock.
1.
2.
3.
4.
5.
6.
7.
8.
9.
6
SUMMARY OF FEATURES
Live View
Real-time Display per Camera: 30fps NTSC / 25fps PAL per channel
Different View Layouts: 1 or full screen, 2, 4, 9, 16
Cycle Cameras: View cameras/channels in sequence
Picture-in-Picture: Display camera/channel view on top of another camera/channel
Digital Zoom: Up to 9x digital zoom
Display Freeze
On-screen Status
Image Enhance: Adjust brightness, contrast, hue and saturation
Manual / Forced Recording: Manually start recording
Live Audio
Sensor Status and Relay Control: Display sensor status and toggle relay
PTZ Control: Presets, Zoom, Focus, Iris Settings and Auto Pan
Recording
Variable Resolution: CIF, ½ D1 and D1
Variable Image Quality: Low, Medium, High
Variable Recording Modes: Continuous, Motion, Sensor and Event
Automatic Disk Storage Management
Audio Recording
Search and Playback
Event Search: Search by year, month, day, hour, event type and camera number
SmartSearch:Searchwithtimelinedisplay,lterbyeventtypeandcameranumber
Single or Multi-channel Playback
Variable Playback Speed: 2x, 4x, 8x, 16x, 1/2x, 1/4x, 1/8x, 1/16x
Setup
System
Information: Display hardware and software information
Date and Time: Set date and time
Network:Setnetworkconguration
DDNS:SetDDNSconguration
User: Set password for user
OSD: Set On-Screen Display (OSD) settings
Tools: Hard disk utilities, Video Signal and DVR Server Updater
Recording
Camera: Set camera status and video quality
Frame Rate: Set normal and event frame rate
Resolution: Set normal and event resolution
Audio: Set audio status and input gain
Schedule: Set recording schedule
Watermark: Enable/Disable watermark
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
7