System information

80
Relay Reset Mode
1. Unique settings checkbox – Indicates whether unique settings are used per relay or otherwise.
If checked, unique settings are used per relay. To have all relays use the same settings, keep this
option unchecked and modify the settings in Relays All.
2. Reset Mode – Displays a drop down list menu for the types of reset modes available. Relays can
bereseteitherbasedonaspeciedamountoftime,synchronizedtothesensorormanuallybythe
user.
3. Duration – Displays the length in seconds before the relay is reset back to its normal state.
4. Restore Defaults – Restores the default settings.
5. Apply – Saves the settings.
81
Alarm Notication
1. Unique settings checkbox – Indicates whether unique settings are used per camera or otherwise.
If checked, unique settings are used per camera. To have all cameras use the same settings, keep
this option unchecked and modify the settings in Camera All.
2. Red Border–Indicateswhetheramotioniconalarmnoticationisenabledornot.Ifchecked,it
means that a motion icon will appear on top of the video in live view if motion is detected.
3. E-mail–Indicateswhethere-mailalarm noticationis enabledor not.If checked,it meansthat
ane-mailnoticationwillbesenttothespeciede-mailalongwithajpegscreenshotattachedtoit
whenanalarmoccursforthatspeciccamera.
4. E-mail Address–Displayse-mailaddressusedforthee-mailalarmnotication.
5. Email Notication Delay –Setsthe minimum delay betweenemailnotications.  If analarmis
triggeredforaspeciccameraandanemailnoticationhasalreadybeensent,anemailwillnotbe
sent again for that camera if the same type of alarm is triggered within the delay period. This is to
preventthespammingofemailnotications.
6. Restore Defaults – Restores the default settings.
7. Apply – Saves the settings.