System information

MAIN BOARD (TOP VIEW)

DVR – Internal Unit Ref. Des. Description

1. 4-Pin ATX Power Connector J17 Connection to power supply 12V-5V-GND

2 40-Pin IDE Connector J10 Connection to hard disk (HDD1)

3. Tact Switch “RESET” SW1 For resetting/rebooting system

4. Terminal Block “Sensor Input & Relay

Output”

J1 Connecting Sensor devices and Relay Output devices to control

sensors and trigger alarms

5. Ethernet Connector J3 Where you can connect the RJ45 cable

6. 2 pc. USB Connector J16 Connection to USB device

7. Debug1 or uart Connector B1 RS232 port for GSM connection

8. IR connector J6 Connection to IR sensor

9. Battery and Battery holder J7 Battery for Real Time Clock

10. DB25 Video and Audio Input Connector J3 Connection with CCTV Camera and Audio

11. Audio Output RCA Jack P3 Audio Output terminal

12. TV Out RCA Jack P2 1 TV Out RCA connection

13. Audio Input J5 Audio Input Terminal

14. 8 sensor, 4 relay J6 Input and output

15. 8 sensor, 4 relay J7 Input and output

STANDALONE DVR

(FRONT VIEW)

DVR – External Unit Description

1. IR Sensor Infrared Sensor for Remote Controller

SIDE BUTTON PANEL

DVR UNIT (BACK VIEW)