System information

How to install the DVR on the wall:

1. For cemented walls, use a drilling machine to drill

screws on the wall. Follow the diagram beside for

drilling positions. (NOTE: If possible, please measure

the distances of screw holes in your unit.)

2. For wooden walls, you may use a hammer to

initially puncture the wall.

3. Insert screws and fasten DVR unit when done.

Ensure that the unit is carefully mounted on the wall

before attaching other peripherals. Use at least 1in

screws.

The approximate net weight of the DVR is 5kg.

REMOTE CONTROLLER

DVR – External Unit Description

1. Live Switch to Live View Mode

2. Setup Switch to Setup Mode

3. ENTER / Cycle Save settings or Go to / Cycle cameras

4. Up / Down / Left / Right Arrows Move up / Move down / Move left / Move right

5. Record Start/Stop FORCED recording

6. Search Search and playback recorded video

7. Backup Switch to Backup Mode

8. Focus For increasing/decreasing focus *For PTZ camera only

9. Iris For increasing/decreasing brightness *For PTZ camera only

10. Zoom For zooming in or out

11. Speed Up To increase playback speed 2x, 4x, 8x or 16x

12. Speed Down To decrease playback speed 1/2x, 1/4x, 1/8x, 1/16x

13. Play / Freeze Play video / Freeze or pause video

14. Next Go to next frame (frame by frame)

15. Previous Go to previous frame (frame by frame)

16. Forward

Forwardplaybackofvideoles10seconds;alsousedinsearchtomove5hours/minutesup

17. Rewind Rewindplaybackofvideoles10seconds;alsousedinsearchtomove5hours/minutesdown

18. Audio Enter Audio Mode

19. Relay Enter Relay Mode

20. PIP Picture in Picture

21. PTZ Enter PTZ

22. Display Adjust image brightness, contrast, hue and saturation

23. Number Buttons Go to camera number (1), (2) … and so on

24. Number 10 button Also functions as a “0” button when used as a single digit in passwords, labels, ip address, etc.

*For the remote control,

use 1 lithium ion 3V battery

INSTALLATION