Datasheet

ManualsBrandsAPEM ManualsPush Actuated Switches & ButtonsPushbutton 250 Vac 4 A 1 x On/(Off) momentary 1 pc(s)

APEM www.apem.com B2-107

1200 series

Momentary pushbutton switches - round plunger

Distinctive features and specifications

❑

Butt action contacts, double break

❑

NF (EN 61058-1), UL and CSA approved

MATERIALS

• Case : polyamide

• Plunger : polyamide

• Bushing : brass, nickel plated

• Contacts :

A : silver

C : copper, silver plated

AGENCY APPROVALS

Models 1233X209 and 1233X209L are standard marked NF.

To order switches marked NF, UL or CSA, complete appropriate box of

ordering format.

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

- silver contacts (A) : 4A 250VAC - 8A 125VAC - 4A 24VDC - 8A 12VDC

- silver plated copper contacts (C) : 2A 250VAC - 3A 125VAC - 2A 24VDC -

3A 12VDC

• Initial contact resistance : 10 mΩ

• Insulation resistance : 1.000 MΩ min. at 500VDC

• Dielectric strength :

2.000 Vrms 50 Hz min. between terminals

3.000 Vrms 50 Hz min. between terminals and frame

• Electrical life : 10.000 cycles at full load

GENERAL SPECIFICATIONS

• Torque : 1,50 Nm (1.10 Ft.lb)

max. applied to nut

• Panel thickness :

5 mm (.196) max.

• Total travel :

NO : 4,5 (.177) +/- 0,3 (.011)

NC : 3,5 (.137) +/- 0,3 (.011)

• Operating temperature :

-20°C to +55°C

Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.

Sealing boots are available to protect the switches against dust and water. They are presented in section H.

Mounting accessories : standard hardware supplied :

- silver contact models : 1 hex nut U166 and 1 knurled nut U411

- copper contact models : 1 hex nut U42 and 1 knurled nut U411

Standard and special hardware are presented in section I.

Packaging unit : 40 pieces, except model 1200.L (50 pieces).

ABOUT THIS SERIES

2A 250VAC or 4A 250VAC, T55/125°C

All models

4A 250VAC - 8A 125VAC

All models function 3 (NO)

EN 61058-1

The company reserves the right to change specifications without notice.

15-Serie 1200-A_20-Serie 1200-A 04/11/14 15:01 Page107

UG1410A

Summary of content (7 pages)

PAGE 1
5-Serie 1200-A_20-Serie 1200-A 04/11/14 15:01 Page107 1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications UG1410A ❑ Butt action contacts, double break ❑ NF (EN 61058-1), UL and CSA approved B2 ELECTRICAL SPECIFICATIONS MATERIALS • Max.
PAGE 2
15-Serie 1200-A_20-Serie 1200-A 31/10/14 09:00 Page108 1200 series Momentary pushbutton switches - round plunger Solder lug/quick-connect terminals - screw terminals • Single pole configurations • Approved models : see following pages • Panel cut-out : Ø 12,2 (.480) NC (function 2) 121. 122. 9.20 (.362) 6.35x0.80 (.25x.031) Ø3.00x0.50 (.118DIAx0.50) 0.80 (.031) 6.35 (.25) 120. 123.
PAGE 3
15-Serie 1200-A_20-Serie 1200-A 31/10/14 09:00 Page109 1200 series Momentary pushbutton switches - round plunger Plunger height : NO model : 7,50 mm, NC model : 5,80 mm 10.50 (.413) Normally Open 6.35x0.80 (.25x.031) 13.20 (.519) 17.00 (.669) ➞ Keyway Ø12.00x0.75 SI (.472DIAx0.75 IS) 14.00 (.551) B2 Ø8.00 (.315DIA) 7.50 (.295) Right angle screw terminals + clamp 12.00 (.472) 1203 7.20 (.283) Normally Closed Ø8.00 (.315DIA) 1.00 (.039) 1202 Ø12.00x0.75 SI (.472DIAx0.75 IS) 7.50 (.
PAGE 4
15-Serie 1200-A_20-Serie 1200-A 31/10/14 09:00 Page110 1200 series Momentary pushbutton switches - round plunger SPECIAL MODELS NF standard marked - Silver contacts X209 Ø12.00x0.75 SI (.472DIAx0.75 IS) Ø8.00 (.315DIA) 9.20 (.362) 1.00 (.039) Normally open 1233A•X209 B2 12.00 (.472) 10.50 (.413) 7.50 (.295) ➞ Keyway 13.20 (.519) 17.00 (.669) Replace • with the desired plunger colour. 14.00 (.551) 6.35x0.80 (.25x0.031) NF standard marked - Silver contacts X209L Ø12.00x0.75 SI (.
PAGE 5
16-Serie 1200M-MR-A_21-Serie 1200M-MR-A 04/11/14 15:03 Page111 1200M/MR series Robust momentary pushbutton switches - metal plunger Distinctive features and specifications UG1410A ❑ Butt action contacts, double break ❑ UL and CSA approved B2 ELECTRICAL SPECIFICATIONS • Max.
PAGE 6
16-Serie 1200M-MR-A_21-Serie 1200M-MR-A 31/10/14 08:59 Page112 1200M/MR series Robust momentary pushbutton switches - metal plunger Solder lug/quick-connect terminals - screw terminals 6.35x0.80 (.25x.031) Ø3.00x0.50 (.118DIAx0.50) Ø3.00x0.50 (.118DIAx0.50) 0.80 (.031) 6.35 (.25) 9.20 (.362) 9.20 (.362) 0.80 (.031) 6.35 (.25) Keyway Solder lug/quick-connect terminals 6,35 x 0,8 (.250 x .031) ➞ Ø12.00x0.75 SI (.472DIAx0.75 IS) Ø8.00 (.315DIA) 1213MR 1213M NO 12.00 (.472) NC 17.00 (.669) 9.
PAGE 7
16-Serie 1200M-MR-A_21-Serie 1200M-MR-A 31/10/14 09:00 Page113 1200M/MR series Robust momentary pushbutton switches - metal plunger CONTACT MATERIALS Silver Copper, silver plated A C AGENCY APPROVALS B2 UL - CSA Availability : approved models are 1213A and 1203A (M or MR) - model 1223A is only UL approved. Marking : to order switches marked UL or CSA, complete above box with desired approvals. SPECIAL CAP NUT 3.50 (.137) Chrome plated cap nut Ø 16 (.629), flat and plain.