Datasheet

B-118 APEM www.apem.com

1400N series

Momentary pushbutton switches - snap-in mounting - square plunger

Distinctive features and specifications

❑

Butt action contacts, double break

❑ Solder lug, straight PC and quick-connect terminals

MATERIALS

• Case : polyamide

• Plunger : polyamide

• Contacts :

A : silver

C : copper, silver plated

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

- silver contacts (A) : 6A 12VDC

- silver plated copper contacts (C) : 3A 12VDC

• Initial contact resistance : 10 mΩ at 1A 2VDC

• Insulation resistance : 1.000 MΩ min. at 500VDC

• Dielectric strength :

1.500 Vrms 50 Hz min. between terminals

2.000 Vrms 50 Hz min. between terminals and metal panel

• Electrical life : 10.000 cycles at full load

GENERAL SPECIFICATIONS

• Panel thickness : 2 mm (.078) max.

• Operating temperature : -20°C to +55°C

Packaging unit : 60 pieces.

Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.

PAGE 1
400N series Momentary pushbutton switches - snap-in mounting - square plunger Distinctive features and specifications ❑ Butt action contacts, double break ❑ Solder lug, straight PC and quick-connect terminals B ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : - silver contacts (A) : 6A 12VDC - silver plated copper contacts (C) : 3A 12VDC • Initial contact resistance : 10 mΩ at 1A 2VDC • Insulation resistance : 1.000 MΩ min. at 500VDC • Dielectric strength : 1.
PAGE 2
1400N series Momentary pushbutton switches - snap-in mounting - square plunger Solder lug, straight PC or quick-connect terminals • Single pole configurations 144.N NO NC Ø1.40 (.055DIA) 7.20 (.283) 6.50 (.255) Ø2.50 (.098DIA) C 141.N/8 5.00 (.196) 2.50 (.098) 3.00 (.118) 141.N 1.20x0.8 (.047x.031) Ø5.00 (.196DIA) 4.70x0.80 (.185DIAx.031) MODEL STRUCTURE B 18.00 (.708) 1413N Normally Open 1415N Changeover 16.00 (.63) 12.00 (.472) 3.50 (.137) 1.50 (.059) 4.70 (.185) 7.40 (.
PAGE 3
1400N series Momentary pushbutton switches - snap-in mounting - square plunger PANEL CUT-OUT 14.30 (.562) 16.50 (.649) B CONTACT MATERIALS A C Silver Copper, silver plated PLUNGER COLOURS 2 3 6 7 Black (standard) Green Red Ivory Switch frame supplied in black. B-120 www.apem.