Data Sheet

ManualsBrandsApem ManualsJoystick & Navigation SwitchesBuilt-in Joystick

3.6

18.5

5.9

3.95

0.28

4.75

APEM

1000 SERIES - MICROSWITCH JOYSTICKS

COMPACT SIZE ROBUST CONSTRUCTION SINGLE OR DUAL AXIS

VERSATILE SINGLE OR DUAL POLE ALTERNATIVE KNOB SELECTION

IP65 ABOVE PANEL BUSH OR SCREW MOUNT V4 SWITCHES

V3 SWITCHES CROSS OR DIAGONAL OPERATION LOW PROFILE

www.apem.com

Summary of content (5 pages)

PAGE 1
5.9 0.28 APEM APEM 4.75 3.95 18.5 3.6 1000 SERIES - MICROSWITCH JOYSTICKS COMPACT SIZE VERSATILE ROBUST CONSTRUCTION SINGLE OR DUAL POLE IP65 ABOVE PANEL V3 SWITCHES SINGLE OR DUAL AXIS ALTERNATIVE KNOB SELECTION BUSH OR SCREW MOUNT CROSS OR DIAGONAL OPERATION www.apem.
PAGE 2
1000 SERIES - MICROSWITCH JOYSTICKS PRODUCT DESCRIPTION GENERAL DESCRIPTION The 1000 Series is a versatile range of low cost switch joysticks and is ideal for light to medium duty environments where proportional control is not a necessity. Configurable with either single or double pole switching, the 1000 Series can also be specified as screw or bush mounted. The joystick construction is determined by the switches employed.
PAGE 3
1000 SERIES - MICROSWITCH JOYSTICKS PRODUCT CONFIGURATION STANDARD OPTIONS The 1000 Series is available with a range of standard options. To specify your joystick, simply choose one option from each column. An example is shown below.
PAGE 4
1000 SERIES - MICROSWITCH JOYSTICKS USEFUL DIMENSIONS V4 SCREW MOUNT V4 BUSH MOUNT 15.00 20.00 15.00 36.00 20.50 41.00 41.00 36.00 23.00 23.00 44.00 V4 DI-POLE LIMITERS AND BEZEL SET BEZEL LIMITERS 16.50 20.00 18.00 41.00 22.00 4.00 45° 24.50 30.50 2.55 V3 SCREW MOUNT 43.00 53.50 45.50 24.50 45.50 53.50 www.apem.
PAGE 5
1000 SERIES - MICROSWITCH JOYSTICKS USEFUL DIMENSIONS V4 SCREW MOUNT - PANEL CUT-OUT & MOUNTING INSTALLATION MOUNTING CUT-OUT 20.00 Ø 36.00 Ø2.80 x 4 36.00 The joystick is mounted from beneath the panel using the 4 x M2.5 machine screws, supplied with the joystick. Supplied as standard with the joystick is a round bezel which may be fitted (according to customer preference) to finish the front face of the panel. Fitting the bezel is optional, and is not necessary if the panel cut-out finishes the panel.