Data Sheet

APEM www.apem.com
Note: The company reserves the right to change specifications without notice.
1000HE series
Switch joysticks for harsh environments
Distinctive features and specifications
 Double seal
 Single or double pole
 Gold contacts
 Oil / acid / alkali resistant boot
 22mm diameter bush mounting
 V4 switches
 Two handle options
 Outer hex nut for wrench tightening
PANEL CUT-OUT
Handle
BE Round
BH Toggle
Poles
1 Single Pole
2 Double Pole
Modifier
135 + Limiter Fitted
136 - Limiter Fitted
Switches
1 6A - V4
3 10A - V4
4 Right angle V4
5 5A/250VAC - V4
Faston Style
7 10A/250VAC - V4
IP67
D Z 08
NOTE:
The joystick is mounted from beneath the panel.
Apply the assembled base
through the mounting cut-out.
MECHANICAL
• Mechanical Life: 1 Million Operations
• Lever Travel: 24º (12º from center)
• Lever Material: Stainless Steel
• Mass/weight: 70g (2.47oz)
• Body Material: Mineral Filled Nylon-6
• Handle Material: Aluminum / Phenolic
• Boot Material: Kumho / Neoprene
• Mounting - Bush: Single Point 22mm Diameter
ENVIRONMENTAL
• Temperature Range: -20ºC to 50ºC
(-4ºF to 122ºF)³
• Above Panel Seal (IP): To IP67
NOTES:
– All values are nominal
– Exact specifications may be subject to configuration. Contact Technical Support for the performance of your
specific configuration.
3. Temperature specification may be subject to the chosen switch option. Please refer to factory.
ELECTRICAL
• Number of Switches: 2, 4, or 8
• Nominal Current: 6A, 10A
• Maximum Voltage: 250V AC
• Contacts #1 6A - V4: Gold
• Contacts #3 10A - V4: Silver
• Contacts #4 Right Angle: Silver
• Contacts #5 Faston Style - V4: Silver
• Contacts #7: Silver
• Switch Contacts: Changeover
• Contact Life: Load Dependent