Datasheet

ManualsBrandsAPEM ManualsPush Actuated Switches & ButtonsPush buttons Pushbutton 1-pole N/A

APEM www.apem.com B-83

8000 series

Momentary or alternate action pushbutton switches

Distinctive features and specifications

❑

Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32)

❑

UL approved

MATERIALS

• Case : diallylphthalate (DAP)

• Actuator : brass, nickel plated

• Bushing : brass, nickel plated

• Housing : stainless steel

• Contacts

A : silver

AD : silver, gold plated

CD : brass, gold plated

• Terminal seal : epoxy

AGENCY APPROVAL

Availability : consult factory for details of approved models.

Marking : to order switches marked UL, complete appropriate box of

ordering format.

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

- silver contacts : 3A 250VAC - 6A 125VAC - 4A 30VDC

- gold plated contacts : 0,4VA max. 20VAC or DC

• Initial contact resistance : 10 mΩ max.

• Insulation resistance : 1.000 MΩ min. at 500VDC

• Dielectric strength :

1.000 Vrms 50 Hz min. between terminals

2.000 Vrms 50 Hz min. between terminals and frame

• Electrical life : 30.000 cycles at full load

GENERAL SPECIFICATIONS

• Torque : 1,25 Nm (.922 Ft.lb)

max. applied to nut

• Total travel : 2,70 mm (.106)

• Operating temperature :

-40°C to +85°C

UG1006-A

Summary of content (6 pages)

PAGE 1
8000 series Momentary or alternate action pushbutton switches Distinctive features and specifications UG1006-A ❑ Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) ❑ UL approved B ELECTRICAL SPECIFICATIONS MATERIALS • Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A 125VAC - 4A 30VDC - gold plated contacts : 0,4VA max. 20VAC or DC • Initial contact resistance : 10 mΩ max. • Insulation resistance : 1.000 MΩ min. at 500VDC • Dielectric strength : 1.000 Vrms 50 Hz min.
PAGE 2
8000 series Momentary or alternate action pushbutton switches Overview 8 SERIES Terminals and bushings 4 6 Straight PC or right angle terminals Solder lug terminals Number of poles 3 4 Electrical functions Single pole Double pole 2 6 ON ON - MOM ON All models with Ø 6,35 (1/4) or Ø 11,9 (15/32) threaded bushing. B Terminals Blank W Solder lugs or straight PC depending on model Right angle Order separately.
PAGE 3
8000 series Momentary or alternate action pushbutton switches Threaded bushing Ø 6,35 (1/4) 1 2 3 Funct. 6 (ON-ON) 1 2 3 1 2 1.10 (.043) 4.00 (.157) 3.70 (.145) 1.90 (.074) • Solder lug, straight PC or right angle terminals • 1 and 2 pole configurations • Button returns in upper position after actuation. 5.30 (.208) ➞ Keyway 1.10 (.043) 1.80 (.070) 3 Funct. 2 (ON-MOM) MODEL STRUCTURE B Shown with standard plunger ➞ Keyway MOM ON MOM ON 2-3 5-6 1-2 4-5 MOM ON APEM 3 0.50 (.
PAGE 4
8000 series Momentary or alternate action pushbutton switches PANEL CUT-OUT Ø2.20 (.086 DIA) 5.20 (.204) Standard Ø6.50 (.255 DIA) 2.70 (.106) 1.10 (.043) Ø6.50 (.255 DIA) With K sealing option B CONTACT MATERIALS A AD CD Silver Silver, gold plated Brass, gold plated Blank No sealing B Epoxy sealed terminals Ø10.60 (.417 DIA) 1 Combined sealings 2 Sealing boot : see section H. B-86 Ø11.80 (.464 DIA) 5.80 (.228) Ø6.40 (.
PAGE 5
8000 series Momentary or alternate action pushbutton switches PLUNGERS For Ø 6,35 (1/4) bushing Dash compulsory before plunger code. Ø6.35-40UNS (1/4-40UNS) Ø6.35-40UNS (1/4-40UNS) Ø4.00 (.157 DIA) 7.00 (.275) Blank Standard 14.20 (.559) 7.00 (.275) 14.20 (.559) 8.80 (.346) 6.30 (.248) Ø4.00 (.157 DIA) -9 B For Ø 11,9 (15/32) bushing (X718 models) Ø11.90-32UNS (15/32-32UNS) Ø6.40 (.251DIA) Ø4.00 (.157 DIA) 12.00 (.472) 12.00 (.472) 7.00 (.275) 8.50 (.334) Ø11.
PAGE 6
8000 series Momentary or alternate action pushbutton switches APPROVAL UL Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete above box with ”UL”. CAPS Order separately. The caps below are for Ø 4 mm plungers (-13 and -9), except U2600. Replace last "0" by number 1 1/4 2 3 4 U630 3.00 (.118) 10.00 (.393) 7.50 (.295) 3.00 (.118) U480 Standard blue dark blue black green grey 11.50x11.50 (.