Datasheet

ManualsBrandsApem ManualsPushbutton SwitchesPushbutton Switch, Vandal Proof 1 A 30 VDC 1NO IP65

APEM www.apem.com B-89

9000 series

Momentary pushbutton switches

Distinctive features and specifications

MATERIALS

• Case : thermoplastique UL94-V0

• Actuator : polyamide, glass

filled

• Bushing : brass, nickel plated

• Contacts :

A : silver

CD : brass, gold plated

• Terminal seal : epoxy

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

- silver contact (A) : 0,3A 250VAC - 0,6A 125VAC - 1A 30VDC

- gold plated contacts (CD) : 100mA 30VDC

• Initial contact resistance : 50 mΩ max.

• Insulation resistance : 1.000 MΩ min. at 500VDC

• Dielectric strength :

1.000 Vrms 50 Hz min. between terminals

1.500 Vrms 50 Hz min. between terminals and frame

• Electrical life : 250.000 cycles

GENERAL SPECIFICATIONS

• Total travel :

• Torque : 1,25 Nm (.922 Ft.lb) max. applied to nut

• Operating temperature : -30°C to +65°C

9600-9400-9400Y 9600N-9400N

Functions 3 and 5 Function 2 Function 3

1,3 mm 2 mm 0,9 mm

❑

Two case lengths

❑

Three electrical functions

❑

Sealing options

❑

Model X1146 with Ø 16 (.630) bushing

UG1006-A

Summary of content (8 pages)

PAGE 1
9000 series Momentary pushbutton switches Distinctive features and specifications UG1006-A ❑ Two case lengths ❑ Three electrical functions ❑ Sealing options ❑ Model X1146 with Ø 16 (.630) bushing B ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : - silver contact (A) : 0,3A 250VAC - 0,6A 125VAC - 1A 30VDC - gold plated contacts (CD) : 100mA 30VDC • Initial contact resistance : 50 mΩ max. • Insulation resistance : 1.000 MΩ min. at 500VDC • Dielectric strength : 1.
PAGE 2
9000 series Momentary pushbutton switches Overview 9 Number of poles SERIES 3 Single pole Electrical functions 2 3 5 Normally closed (NC) Normally open (NO) Combined (NC/NO) Terminals, case and bushing B Case length 11,2 (.440) All models have Ø 6,35 (1/4) threaded bushing. 4 Straight PC terminals 6 Solder lug terminals 4..Y Straight PC terminals, bracket mounting Case length 8,5 (.334) 4..N Straight PC terminals 6..N Solder lug terminals 6..
PAGE 3
9000 series Momentary pushbutton switches 9600 - 9400 - 9400Y • Single pole • Solder lug or straight PC terminals • Epoxy sealed terminals 9600Z1 Function 5 (combined) 1.20 (.047) 2.80 (.110) 4.55 (.179) 5.20 (.204) 1.20 (.047) 1.50 (.059) Function 3 (NO) 9400 5.20 (.204) 2.40 (.094) 8.70 (.342) Function 2 (NC) 9600 1.00 (.039) 2.00 (.078) MODEL STRUCTURE B Solder lug terminals - case length 11,2 (.440) : 9600 6.00 (.236) Ø4.00 (.157 DIA) 9635B Combined function Ø10.00 (.393 DIA) 11.
PAGE 4
9000 series Momentary pushbutton switches 9600N - 9400N Solder lug terminals - case length 8,5 (.334) : 9600N 6.00 (.236) Ø4.00 (.157 DIA) Normally Open 8.50 (.334) Ø9.50 (.374 DIA) 7.00 (.275) EPOXY 5.00 (.196) 0.40 (.015) 5.08 (.200) 1.50 (.059) 9633NB Ø6.35-40UNS (1/4-40UNS) 2.00 (.078) Ø8.50 (.334 DIA) Also available with quick-connect terminals 2,8 x 0,5 mm : 9633NZ1 Straight PC terminals - case length 8,5 (.334) : 9400N 6.00 (.236) Ø4.00 (.157 DIA) Ø6.35-40UNS (1/4-40UNS) Ø9.50 (.
PAGE 5
9000 series Momentary pushbutton switches CONTACT MATERIALS A CD Silver Brass, gold plated Special contact, lower rating : see X601 under "Special options". SEALING B Epoxy sealed terminals K Front panel sealing by two O-rings. Protects the switch against water and dust. Panel seal withstands 0,1 bar pressure and remains tight even when switch is operated. KB 5.50 Maxi (.216 MAX) B 1 Combined sealings K Sealing boots : see section H.
PAGE 6
9000 series Momentary pushbutton switches CAPS + U... U1140 U1720 Ø15.00 (.590 DIA) Ø10.00 (.393) Replace last "0" by number 1 1/4 2 3 4 5 6 7 7/1 9 3.00 (.118) 3.00 (.118) 10.00 (.393) 7.50 (.295) Cap colours U480 Standard U630 5.00 (.195) 4.00 (.157) U2430 Square blue dark blue black green grey yellow red ivory white orange 6.00 (.236) 11.50x11.50 (.452 SQ) 11.50x11.50 (.452 SQ) 3.00 (.196) 6.35 (.250) 3.00 (.118) 6.35 (.250) 3.00 (.118) 4.00 (.157) 3.30 (.
PAGE 7
9000 series Alternate action or momentary pushbutton switches Distinctive features and specifications ❑ Bushing Ø 6,35 (1/4) and 11,9 (15/32) ❑ Two electrical functions B ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load and electrical life : - silver contacts (A) : 0,5A 250VAC - 1A 28VDC - 250.000 cycles 1,5A 250VAC - 3A 28VDC - 10.000 cycles - gold plated contacts (CD) : 0,4VA 20V max. AC or DC • Initial contact resistance : 10 mΩ max.
PAGE 8
9000 series Alternate action or momentary pushbutton switches • Single pole • Solder lug terminals • Epoxy sealed terminals Function 3 (NO) 2.55 (.100) Function 1 OFF ON 1.00 (.040) 5.60 (.220) 2.05 (.080) 1.25 (.050) B Bushing Ø 6,35 (1/4) - Alternate action - tactile feedback Silver contacts 9631AB ON - OFF 5.35 (.210) - 6.35 (.250) ON Ø9.40 (.370 DIA) 16.25 (.640) Gold plated contacts 9631CDB Ø4.05 (.160 DIA) Ø6.35-40UNS (1/4-40UNS) OFF EPOXY 5.60 (.220) 0.40 (.015) 5.30 (.